ELCO Lighting Indoor LED Tape LED Tape Light 8.8W/Ft 24V Per Ft E80-24

Product Overview

The ELCO Lighting E80-2440 is a 24V indoor LED tape light that consumes 8.8 watts per foot for linear and accent illumination.

Use the SKU and listed specifications to size drivers and confirm fit with fixture schedules and project requirements.

Key Features

• Power density: 8.8 W per foot
• Nominal voltage: 24V
• Typical applications: cove, under-cabinet, millwork, display accent, shelf and toe-kick lighting
• Cut only on marked cut points; size driver to total run wattage

Function and typical uses

The E80-2440 provides a linear light source for interior accent and task illumination. It is specified by wattage per foot to support continuous runs and accent lighting in architectural and millwork settings.

• Common uses: cove lighting, under-cabinet illumination, millwork accents, display and shelf lighting, toe-kick lighting

Electrical and driver sizing

This SKU is a 24V tape light with a listed consumption of 8.8 W per foot. Size a 24V constant-voltage driver based on the total wattage of the installed run.

• Power per foot: 8.8 W/ft — multiply by run length to determine total wattage
• Voltage: 24V — requires a compatible 24V constant-voltage driver

Installation and handling notes

Follow the product’s marked cut points when shortening runs. Provide a secure mounting surface and allow for heat dissipation. Verify correct polarity and secure connections during installation.

• Cut only on the marked cut points
• Size driver to the total run wattage
• Confirm correct polarity and secure connections

Product identity and ordering

This page describes the ELCO Lighting E80-2440 SKU (CCT: 4000K). Related SKUs are available in other correlated color temperatures; verify the exact model number and color temperature required before ordering.

• Model / SKU: E80-2440 (this SKU: 4000K)
• Related SKUs: E80-2430 (3000K), E80-2427 (2700K)

Before You Order

Confirm the exact SKU and correlated color temperature for your project. Use the tape’s 8.8 W/ft rating to calculate total driver capacity for the planned run length.

• Confirm model and CCT before ordering
• Calculate total wattage = 8.8 W/ft × total run length to size a 24V driver

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting Indoor LED Tape LED Tape Light 8.8W/Ft 24V Per Ft E80-24. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.