ELCO Lighting 50W 12V Low Voltage Transformer ETR12

Product Overview

The ELCO Lighting ETR12 is a dedicated low-voltage transformer that provides 50W output at 12V for compatible LED fixtures and tape.

Use the exact SKU (ETR12) and the listed specifications to confirm fit with fixture schedules, retrofit projects, and contractor inventories.

Key Features

• 50W maximum output capacity to the connected 12V LED load
• 12V output suitable for low-voltage LED fixtures, modules, and tape
• Single SKU: ETR12 — confirm model when specifying or ordering

What this transformer provides

The ETR12 is a low-voltage transformer rated to deliver 50 watts of output at 12 volts. It supplies power to 12V LED lighting systems and is intended to be matched to the total connected load so the combined fixture wattage does not exceed 50W.

• Output: 12V
• Maximum output capacity: 50W

Where to use the ETR12

Use the ETR12 in low-voltage LED lighting applications where a 12V supply and up to 50W capacity are required. Typical uses include powering LED tape, modules, small architectural fixtures, and retrofit scenarios where existing low-voltage systems are being updated or expanded.

• LED tape and module power
• Architectural and accent lighting
• Retrofit projects and contractor stock

Compatibility and installation checks

Match the ETR12's 12V output and 50W capacity to the connected fixtures. Confirm the dimming/control protocol required by the LED fixtures (for example ELV, TRIAC, or 0-10V) before wiring, since dimming compatibility is not specified for this SKU.

• Confirm total connected load does not exceed 50W
• Verify fixture voltage requirement is 12V
• Confirm dimming/control protocol with the fixture manufacturer prior to installation

Key specifications

The following items summarize the primary technical identifiers and rating for ordering and design reference.

• Brand: ELCO Lighting
• Model / SKU: ETR12
• Product type: Low Voltage Transformer
• Wattage: 50W
• Output voltage: 12V

Before You Order

Confirm the ETR12 model number and total quantity required before ordering. Verify that the connected fixtures require 12V and that their combined wattage does not exceed 50W. Check the required dimming or control protocol with the fixture manufacturer; dimming compatibility is not specified for this SKU.

• Confirm model: ETR12
• Verify total connected load ≤ 50W
• Ensure fixtures are 12V-compatible
• Confirm dimming/control protocol before installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting 50W 12V Low Voltage Transformer ETR12. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.