ELCO Lighting E60-2440-100 LED Tape Light, 24V, 5.8 W/ft, 100 ft

Product Overview

The ELCO Lighting E60-2440-100 is a 100 ft LED tape light that operates at 24V and consumes 5.8 watts per foot.

Use the SKU E60-2440-100 and the listed electrical specifications to size drivers and verify project requirements.

Key Features

• 5.8 W per foot power consumption
• 24V nominal operating voltage
• 100 ft reel (SKU: E60-2440-100)
• Typical use cases include cove, under‑cabinet, millwork and display accent lighting

What this tape light is used for

This tape light provides continuous linear illumination. Common applications include cove lighting, under‑cabinet illumination, millwork accents, display lighting and shelf or toe‑kick lighting where a 24V LED tape is specified.

• Cove and under‑cabinet lighting
• Millwork, display and shelving accents
• Shelf and toe‑kick lighting

Electrical and driver sizing

The product is rated at 24V and 5.8 W per foot. Calculate total wattage by multiplying 5.8 W by the planned run length to determine required driver capacity.

• Nominal voltage: 24V
• Power consumption: 5.8 W/ft — multiply by run length for total wattage
• Size the driver based on total wattage according to the driver manufacturer's guidance

Cutting and installation notes

Cut only at the tape’s marked cut points and plan power feeds and run layouts with the product’s electrical rating in mind. Use mounting channels, diffusers, adhesives or connectors that are appropriate for the chosen installation and mounting surface.

• Cut only on the tape’s marked cut points
• Plan power feeds and runs to address voltage drop for long runs
• Use compatible mounting channels, diffusers or adhesives as needed

Key product specifications

Reference the following specifications for ordering and project verification. Confirm model number and quantities before placing an order.

• Brand: ELCO Lighting
• Model / SKU: E60-2440-100
• Product type: LED Tape Light
• Length: 100 ft (single reel)
• Power per foot: 5.8 W/ft
• Voltage: 24V

Before You Order

Confirm the model number (E60-2440-100) and total run length so you can size drivers and plan power feeds appropriately.

• Determine driver wattage by multiplying 5.8 W by the planned run length.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E60-2440-100 LED Tape Light, 24V, 5.8 W/ft, 100 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.