ELCO Lighting E50-2430-16 LED Tape Light, 3000K, 24V, 5 W/ft, 16 ft

Product Overview

The ELCO Lighting E50-2430-16 is a fixed 3000K LED tape light that operates at 24V and consumes 5 watts per foot. The supplied SKU covers a 16 ft run.

Designed for linear accent and task applications such as cove, under‑cabinet, millwork, and display lighting, this tape light should be specified and ordered by its exact model number (E50-2430-16).

Key Features

• 3000K color temperature for warm‑white illumination
• 24V low‑voltage operation
• 5 W per foot power consumption (use total run to size driver)
• 16 ft single SKU run (E50-2430-16)

What this product is used for

The E50-2430-16 is intended for linear accent and task illumination where a warm white color is desired. Typical uses include cove lighting, under‑cabinet task lighting, millwork and display accents, shelf illumination, and toe‑kick lighting.

• Cove and under‑cabinet lighting
• Millwork, display, and architectural linear runs
• Shelf and toe‑kick accent lighting

Electrical and driver sizing

This tape light runs on 24V DC and consumes 5 watts per foot. Driver selection must be based on the total installed run length to ensure adequate capacity.

• Voltage: 24V
• Power: 5 W/ft — multiply by run length to calculate total wattage
• Size driver with appropriate margin for continuous load and any run extensions

Installation notes and cut points

Follow the product’s marked cut points when shortening runs. Confirm polarity and supply the rated 24V source. For longer continuous runs or multiple runs, plan wiring and driver placement to maintain consistent voltage and light output.

• Cut only on marked cut points
• Confirm correct 24V supply and polarity before connection
• Determine driver location based on run layout to avoid excessive voltage drop

Product specifications

Reference the following model‑specific specifications when matching to schedules, submittals, or purchase orders.

• Brand: ELCO Lighting
• Model / SKU: E50-2430-16
• Color Temperature: 3000K
• Voltage: 24V
• Power: 5 W/ft
• Run length: 16 ft (single SKU run)

Before You Order

Confirm the exact model number (E50-2430-16) and the quantity required for your project. Size the 24V driver to the total wattage of all runs and plan run lengths to the product’s marked cut points.

• Verify model E50-2430-16 before ordering
• Calculate driver wattage: 5 W/ft × total run feet
• Cut only at marked cut points; plan driver placement to limit voltage drop

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E50-2430-16 LED Tape Light, 3000K, 24V, 5 W/ft, 16 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.