ELCO Lighting E4LTU30D2 4-Inch Lighting Component, 3000 lm, 120V / 277V, 0-10V / TRIAC / ELV

Product Overview

The ELCO Lighting E4LTU30D2 is a 4-inch lighting component that delivers 3000 lumens for fixture installation, finishing, or replacement.

This SKU supports 0-10V, TRIAC, and ELV dimming and is specified for 120V / 277V operation; confirm exact fixture compatibility before installation.

Key Features

• Delivered output: 3000 lumens
• 4" aperture/form factor
• Electrical: 120V / 277V
• Dimming compatible with 0-10V, TRIAC, and ELV controls
• Intended as a component for fixture installation, finishing, or replacement

What this component does

Direct answer: The E4LTU30D2 supplies a 3000-lumen light source in a 4" form factor for compatible fixtures.

Use this SKU when a 4" aperture component with a 3000 lm output is required as a module, replacement, or for fixture finishing.

• Delivered light: 3000 lumens
• Aperture: 4"

Electrical and dimming compatibility

Direct answer: The product is specified for 120V / 277V electrical systems and lists compatibility with 0-10V, TRIAC, and ELV dimming protocols.

Verify the project's wiring and controls to ensure the selected dimming method is supported by the fixture and control system.

• Voltage: 120V / 277V
• Dimming: 0-10V, TRIAC, ELV

Typical applications

Direct answer: Intended for fixture installation and finishing, accessory replacement, and contractor stock.

Specify this component when a 4" aperture and a 3000-lumen output are required and the fixture series accepts this SKU.

• Fixture installation and finishing
• Accessory replacement
• Contractor stock

Compatibility and installation notes

Direct answer: Confirm the E4LTU30D2 matches the exact ELCO series, aperture, and mechanical/electrical interfaces of the target fixture before ordering.

Verify model numbers and required electrical/dimming compatibility against fixture schedules or manufacturer documentation.

• Confirm physical fit with the receiving fixture or trim
• Verify required voltage and dimming protocol compatibility prior to installation

Before You Order

Confirm the model number (E4LTU30D2) and that the 4" aperture, electrical connections, and dimming protocol match your fixture and control system before ordering.

• Verify mechanical fit with the target ELCO fixture series and trim
• Confirm required voltage (120V or 277V) and dimming control compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E4LTU30D2 4-Inch Lighting Component, 3000 lm, 120V / 277V, 0-10V / TRIAC / ELV. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.