ELCO Lighting E45-2440-16 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 16Ft Roll

Product Overview

ELCO Lighting E45-2440-16 is a 16-foot roll of indoor LED tape light that consumes 4.4 watts per foot and operates at 24 volts.

Common uses include linear accent and task lighting such as cove and under-cabinet applications. Size the 24V driver to the total run wattage and cut only at marked cut points.

Key Features

• 4.4 W per foot power consumption
• 24V DC input
• Supplied as a 16 ft roll (SKU: E45-2440-16)
• Intended for indoor linear and accent lighting (cove, under-cabinet, millwork, display, shelf/toe-kick)

What this tape light is for

The E45-2440-16 is an indoor LED tape light intended for linear illumination and accent applications. Typical uses include cove lighting, under-cabinet task lighting, millwork and display accents as well as shelf and toe-kick illumination.

• Form factor: 16 ft roll (SKU E45-2440-16)
• Suitable for continuous linear runs and segmented accent lighting

Power and driver sizing

This tape consumes 4.4 watts per foot and runs on 24V DC. Total wattage for a run equals 4.4 W × run length (ft). Size a 24V driver to at least the calculated total wattage plus any required safety margin according to local practice or project specification.

• Power per foot: 4.4 W/ft
• Voltage: 24V DC
• Driver selection: choose a 24V driver with capacity equal to or greater than the total run wattage

Installation and cutting guidance

Cut the tape only at the marked cut points and maintain the rated 24V supply at the tape. Observe polarity when connecting to the driver or field wiring and follow any applicable local electrical practices.

• Cut only on marked cut points
• Supply the rated 24V to the tape; observe wire polarity
• Size driver to total run wattage

Product specifications

Use these SKU-level specifications when matching this product to schedules and project requirements.

• Brand: ELCO Lighting
• Model / SKU: E45-2440-16
• Product type: LED Tape Light
• Power per foot: 4.4 W/ft
• Voltage: 24V
• Roll length: 16 ft

Before You Order

Confirm the model number (E45-2440-16) and total run length before ordering. Use the 4.4 W/ft value to calculate total driver wattage.

• Confirm model/SKU: E45-2440-16
• Calculate total wattage: 4.4 W × run length (ft) and select a 24V driver with sufficient capacity
• Cut only at marked cut points

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E45-2440-16 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 16Ft Roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.