ELCO Lighting E45-2430-100 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 100Ft Roll 3000K

Product Overview

The ELCO Lighting E45-2430-100 is a 24V LED tape light supplied as a 100 ft roll that delivers 4.4 watts per foot and a fixed 3000K warm-white color temperature.

This SKU is intended for cove, under-cabinet, millwork, display accent, and other architectural linear lighting applications where continuous warm-white illumination is required.

Key Features

• 4.4 W per foot power consumption — size drivers to the total run length
• Fixed 3000K color temperature for warm-white lighting
• 24V nominal drive voltage
• Supplied as a 100 ft roll (SKU E45-2430-100)

What this tape light is for

The E45-2430-100 is designed for continuous linear illumination in indoor settings. Typical applications include cove and under-cabinet lighting, millwork and display accents, architectural linear runs, and shelf or toe-kick lighting.

• Suitable for accent, task, and indirect ambient lighting in residential and commercial interiors
• Intended for fixed 3000K warm-white installations where a consistent color is required

Power and color

This LED tape consumes 4.4 watts per foot and outputs a fixed 3000K color temperature (warm white). Use the watts-per-foot value to calculate total load for driver selection.

• Power: 4.4 W/ft — multiply by run length to determine driver capacity
• Color temperature: 3000K (fixed)

Driver sizing and cutting

The E45-2430-100 runs on 24V. Confirm the total wired run length and calculate wattage by multiplying run length by 4.4 W/ft to select a compatible 24V constant-voltage driver. Only cut the tape at the manufacturer's marked cut points.

• Supply a 24V constant-voltage driver sized to the total run wattage
• Cut only on marked cut points to maintain proper circuit segments and avoid damage

Product format and ordering

This SKU is supplied as a 100 ft roll. Confirm the model number and total quantity required for your project before ordering.

• Model / SKU: E45-2430-100
• Format: 100 ft roll
• Brand: ELCO Lighting

Before You Order

Confirm the model number and the total run length required for your project. Use the 4.4 W/ft rating and 24V voltage to size drivers and power distribution.

• Verify E45-2430-100 is the correct SKU for your color temperature, voltage, and roll length needs
• Calculate total wattage: 4.4 W/ft × total run length to determine driver capacity
• Cut only at marked cut points during installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E45-2430-100 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 100Ft Roll 3000K. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.