ELCO Lighting E44-2440-100 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 100Ft Roll

Product Overview

The ELCO Lighting E44-2440-100 is a 100 ft roll of indoor LED tape light that consumes 4.4 watts per foot and operates at 24V DC.

This SKU is supplied as a single 100 ft roll; use the per‑foot wattage to determine total run wattage and select an appropriately sized 24V LED driver. Cut only at the marked cut points on the tape.

Key Features

• Power: 4.4 W per foot — use to calculate total load
• Voltage: 24V DC operation
• Length: 100 ft roll (SKU E44-2440-100)
• Typical interior uses: cove, under‑cabinet, millwork and display accent lighting
• Installer note: cut only on marked cut points

What this product does

The E44-2440-100 is an indoor LED tape light supplied as a 100 ft roll that provides continuous linear illumination at 4.4 W/ft for interior accent, task, or ambient lighting.

• Flexible tape intended for long linear runs
• Used to provide accent and task illumination in interior settings

Electrical and load planning

Use the 4.4 W/ft specification to calculate total wattage for the assembled run and choose a 24V DC LED driver with sufficient capacity and appropriate safety margin.

• Power per foot: 4.4 W/ft
• Nominal voltage: 24V DC
• Calculate total wattage = 4.4 W/ft × run length (ft) to size the driver

Installation notes

Cut the tape only at the manufacturer’s marked cut points. Follow standard low‑voltage wiring practices and local electrical codes. Account for voltage drop on long runs when planning driver placement and wiring gauge.

• Cut only at marked cut points
• Confirm correct polarity when connecting to a 24V driver
• Plan wiring and driver placement to limit voltage drop

Recommended applications

This tape light is suitable for interior accent and task lighting where a flexible, linear light source is desired.

• Cove lighting
• Under‑cabinet lighting
• Millwork and display accents
• Shelf and toe‑kick lighting
• Architectural linear runs

Before You Order

Confirm the SKU and quantity for your project and use the 4.4 W/ft rating with your run length to specify a 24V driver with adequate capacity.

• Verify E44-2440-100 is the required SKU
• Calculate total wattage: 4.4 W/ft × desired run length (ft)
• Plan driver capacity and wiring to limit voltage drop
• Cut only on the tape’s marked cut points

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E44-2440-100 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 100Ft Roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.