ELCO Lighting E44-2430-16 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 16Ft Roll

Product Overview

The ELCO Lighting E44-2430-16 is a 16 ft roll of indoor LED tape light that consumes 4.4 watts per foot and operates on 24V DC.

Common applications include cove, under-cabinet, millwork, display, shelf, and toe-kick lighting. Size the LED driver to the total run wattage and cut only at the marked cut points.

Key Features

• Power density: 4.4 W per foot
• Rated voltage: 24V DC
• Sold as a 16 ft roll (SKU E44-2430-16)
• Intended for indoor linear and accent lighting applications

Function and common uses

Use this LED tape light for linear illumination and accent lighting where a low-profile continuous source is desired. Typical applications listed for this model include cove and under-cabinet lighting, millwork and display accents, architectural linear runs, and shelf or toe-kick illumination.

• Indoor decorative and task lighting
• Provides continuous runs when supplied and installed correctly
• Sold as a 16 ft roll; can be cut at marked points to required lengths

Electrical and driver sizing

This SKU operates at 24V DC and consumes 4.4 watts per foot. Size a 24V LED driver to handle the total wattage of the connected tape length, allowing an appropriate margin per project or code requirements.

• Power per foot: 4.4 W/ft — multiply by run length to determine total wattage
• Voltage: 24V DC — requires a compatible 24V LED driver
• Account for total connected tape length when selecting driver capacity

Installation and cut points

Install the tape following typical LED tape practices: attach to a clean, dry surface and route wiring to a properly sized 24V driver. Only cut the tape at manufacturer-marked cut points to maintain circuit integrity.

• Cut only on marked cut points
• Mount to a stable substrate
• Confirm polarity when making electrical connections

Key specifications

Quick reference specifications for procurement and schedules.

• Brand: ELCO Lighting
• Model / SKU: E44-2430-16
• Form: 16 ft roll of indoor LED tape
• Power: 4.4 W per foot
• Voltage: 24V DC

Before You Order

Confirm the model number (E44-2430-16) and quantity required before ordering.

• Verify the project requires a 24V tape at 4.4 W/ft
• Calculate total run wattage: 4.4 W/ft × total feet to determine driver capacity

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E44-2430-16 Indoor LED Tape LED Tape Light 4.4W/Ft 24V 16Ft Roll. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.