ELCO Lighting E2L08RIC Driver and Jbox 2" Insert 120V/277V 850 lm Tub
Description
Product Overview
The ELCO Lighting E2L08RIC (SKU: E2L08RIC) is a lighting driver specified with 850 lumens of delivered light and a 2" junction box insert form factor for recessed downlight installations.
The catalog information lists a 120V input. Verify electrical and dimming compatibility with your fixtures before installation.
Key Features
- Delivered light: 850 lm
- Documented input voltage: 120V
- Form factor: driver with 2" junction box insert for recessed downlight applications
- Model / SKU: E2L08RIC
What this driver does
The E2L08RIC is a lighting driver intended to supply power to low‑voltage LED fixtures and modules and is listed with a delivered output of 850 lumens. It is described with a 2" junction box insert suitable for recessed downlight installations.
- Provides 850 lm delivered light (as documented)
- Intended for use with compatible low‑voltage LED loads
Suggested use cases
Based on the product listing, typical uses include recessed downlights, LED tape/modules, and retrofit scenarios where a compact driver with a junction box insert is required.
- Recessed downlight installations with a 2" J‑box insert
- LED tape and module power (verify electrical requirements)
- Retrofit and contractor stock
Compatibility and installation notes
The catalog data explicitly lists a 120V input for this SKU. Confirm the required input voltage for your installation and that the driver's output voltage, wattage capacity, and dimming protocol match the connected fixtures before wiring.
Consult fixture datasheets, control specifications, and local electrical codes for final installation requirements.
- Confirm input voltage (catalog lists 120V for this SKU)
- Match driver output and wattage capacity to connected LED load
- Verify dimming protocol compatibility with controls and fixtures
- Order using the exact model number: E2L08RIC
Key specifications
Use these documented product details for planning and comparison. For final electrical or installation decisions, refer to project documentation and applicable codes.
- Brand: ELCO Lighting
- Model / SKU: E2L08RIC
- Product type: Lighting driver (2" junction box insert)
- Delivered lumens: 850 lm
- Documented input voltage: 120V
Before You Order
Confirm the model number (E2L08RIC) and that the documented 120V input, driver output, wattage capacity, and dimming protocol match your fixtures before ordering.
- Verify the required input voltage for your installation (catalog lists 120V for this SKU).
- Confirm driver output and wattage capacity match the connected LED load.
- Order the exact SKU: E2L08RIC.
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E2L08RIC Driver and Jbox 2" Insert 120V/277V 850 lm Tub. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | ELCO Lighting |
|---|---|
| SKU | E2L08RIC |
| Product type | Lighting Driver (Jbox 2" Insert) |
| Lumens | 850 lm |
| Voltage | 120V |
| Product Handle | elco-lighting-e2l08ric-lighting-driver |
Comments






