ELCO Lighting E1RLA08IC Architectural Oak IC Remodel Power Pack 8W 120V 900 lm

Product Overview

The ELCO Lighting E1RLA08IC is an Architectural Oak IC remodel power pack that supplies up to 8W of LED load capacity and delivers 900 lumens while operating on 120V input.

Designed for low-voltage LED lighting systems, the E1RLA08IC is intended for tape and module power, architectural lighting, retrofits, and contractor stock. Match the SKU and specifications to project requirements before ordering.

Key Features

• 8W maximum output capacity to the connected LED load
• 900 lumens delivered output
• 120V input
• Architectural Oak IC remodel form factor intended for retrofit and contractor applications

What this unit does

The E1RLA08IC is a compact power pack for low-voltage LED systems that provides up to 8 watts of output capacity and is specified to deliver 900 lumens when used with compatible LED modules or tape. It accepts a 120V input.

• Output capacity: 8W
• Delivered light: 900 lm
• Input voltage: 120V

Where to use it

Use this power pack in remodel and retrofit projects, architectural accent lighting, or as a contractor supply for small low-voltage LED runs. It is intended for powering LED tape, modules, and other low-voltage LED loads that do not exceed the 8W output rating.

• Architectural lighting
• LED tape and module power
• Retrofit installations and contractor stock

Compatibility and installation notes

Match the E1RLA08IC’s output wattage and voltage to the connected LED load before installation. Confirm the required dimming protocol for your fixtures or controls prior to wiring.

• Confirm output voltage and total connected wattage do not exceed 8W
• Verify dimming protocol (for example ELV, TRIAC, or 0–10V) with the LED fixtures and controls before installation

Technical specifications

Use the following specifications as the authoritative, model-specific reference when comparing fixtures or preparing fixture schedules.

• Brand: ELCO Lighting
• Model / SKU: E1RLA08IC
• Product type: Architectural Oak IC Remodel Power Pack
• Wattage: 8W
• Lumens: 900 lm
• Voltage: 120V

Before You Order

Confirm the model number and quantity required match your project schedule. Verify the total connected LED load and dimming protocol before ordering.

• Confirm E1RLA08IC is the exact SKU required
• Verify total connected wattage does not exceed 8W
• Confirm dimming compatibility (ELV, TRIAC, 0–10V, etc.) with fixtures and controls

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting E1RLA08IC Architectural Oak IC Remodel Power Pack 8W 120V 900 lm. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.