ELCO Lighting DRVM12V40W Magnetic LED Driver 40W 12V DC

Product Overview

The ELCO Lighting DRVM12V40W is a magnetic LED driver that provides up to 40 watts of output at 12 V DC for low-voltage LED lighting systems.

Use the exact SKU (DRVM12V40W) to match the driver to fixture schedules, retrofit projects, and contractor stock lists.

Key Features

• 40W output capacity to supply low-voltage LED loads
• 12V DC output voltage for tape, modules, and low-voltage fixtures
• Single SKU: DRVM12V40W

What this driver does

The DRVM12V40W is a magnetic LED driver designed to deliver a steady 12 V DC output with a maximum output capacity of 40 W. It supplies power to low-voltage LED fixtures, LED tape, and modules that require a 12 V DC source.

• Delivers up to 40 watts to the connected LED load
• Provides 12 V DC output suitable for common low-voltage LED products

Typical applications

Select this driver for low-voltage LED installations where a magnetic-style driver is specified and the total connected load does not exceed 40 W.

• Low-voltage LED lighting systems
• LED tape and module power supply
• Architectural accent lighting
• Retrofit projects and contractor stock

Compatibility and installation notes

Match the DRVM12V40W to your LED load by confirming both the 12 V output and the 40 W maximum capacity. Confirm the dimming protocol required by the fixtures—this SKU description does not specify supported dimming methods—before wiring.

• Verify total connected LED wattage does not exceed 40 W
• Confirm fixtures require 12 V DC input
• Confirm required dimming protocol (e.g., ELV, TRIAC, 0–10V) separately; the driver’s dimming compatibility is not specified here

Technical specifications

Use these verified specifications as a concise reference when specifying or ordering the DRVM12V40W.

• Brand: ELCO Lighting
• Model / SKU: DRVM12V40W
• Product type: Magnetic LED Driver
• Output wattage: 40 W
• Output voltage: 12 V DC

Before You Order

Confirm the model number and quantity required before ordering. Verify that the total connected LED wattage does not exceed 40 W and that your fixtures require a 12 V DC supply. Confirm required dimming protocol and installation details with project documents or fixture manufacturers, as dimming compatibility is not specified here.

• Confirm SKU: DRVM12V40W
• Confirm total load ≤ 40 W
• Confirm fixture input: 12 V DC
• Confirm dimming protocol separately

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVM12V40W Magnetic LED Driver 40W 12V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.