ELCO Lighting DRVE24V96DW Electronic Dimmable LED Driver 96W 24V DC

Product Overview

The ELCO Lighting DRVE24V96DW is an electronic LED driver that supplies up to 96 watts at a 24V DC output for low-voltage LED lighting systems.

Use the SKU DRVE24V96DW when matching to fixture schedules and project specifications; confirm output voltage, total load, and dimming/control compatibility before installation.

Key Features

• 96W maximum output capacity
• 24V DC output for low-voltage LED tape and modules
• Dimmable when used with a compatible dimmer
• Single SKU: DRVE24V96DW

What this driver does

The DRVE24V96DW converts mains power to a regulated 24V DC output and is designed to power low-voltage LED systems up to 96 watts.

• Provides a regulated 24V DC output.
• Supports up to 96W total connected LED load.

Electrical output and load guidance

Match the driver's 24V output and 96W capacity to the aggregate requirements of the connected LED loads. Do not exceed the 96W maximum output.

• Output voltage: 24V DC
• Maximum output power: 96W
• Ensure total connected load ≤ 96W

Dimming and control considerations

The product is described as dimmable. The specific dimming method supported by this driver is not specified in the available information; confirm the required dimming protocol and compatibility with your dimmer and fixtures before installation.

• Dimmable — verify supported dimming method with project documents or supplier
• Confirm compatibility between driver, dimmer, and LED fixtures

Typical applications

Suitable for low-voltage LED applications that require a 24V DC source and up to 96W of power.

• LED tape and flexible strip lighting
• LED modules and architectural accent lighting
• Retrofit and contractor stock for low-voltage lighting

Packaging and SKU

This product page covers the single SKU DRVE24V96DW. Use the exact model number when specifying or ordering to ensure correct matching with project requirements.

• Model / SKU: DRVE24V96DW
• Brand: ELCO Lighting

Before You Order

Confirm the model number, required quantity, that the combined wattage of connected LED fixtures does not exceed 96W, and that fixtures accept a 24V DC supply.

• Confirm SKU: DRVE24V96DW
• Ensure total connected load ≤ 96W
• Verify fixtures accept 24V DC

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVE24V96DW Electronic Dimmable LED Driver 96W 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.