ELCO Lighting DRVE24V60W Electronic Dimmable LED Driver 60W 24V DC

Product Overview

The ELCO Lighting DRVE24V60W is an electronic dimmable LED driver that provides up to 60W of DC power at 24V for low-voltage LED systems.

Use the SKU DRVE24V60W to verify compatibility with fixtures and project schedules; confirm dimmer protocol and total load before wiring.

Key Features

• 60W maximum output capacity
• 24V DC output for low-voltage LED systems
• Dimmable (verify compatible dimming protocol before installation)
• Model/SKU: DRVE24V60W

What this driver does

The DRVE24V60W converts mains power to a regulated 24V DC output and is intended to power low-voltage LED loads up to 60 watts.

Where to use it

Suitable for low-voltage LED lighting projects that require a 24V DC supply and up to 60W of combined load.

• LED tape and strip lighting
• LED modules and small 24V fixtures
• Architectural accent and cove lighting
• Retrofit projects where a 24V driver is specified

Electrical output and load matching

Match connected LED loads to the driver's 24V DC output and ensure the total wattage of all connected fixtures does not exceed 60W.

• Output voltage: 24V DC
• Maximum output power: 60W
• Ensure total connected wattage ≤ 60W before final wiring

Dimming compatibility and notes

The unit is described as dimmable. Confirm the specific dimming protocol required (for example ELV, TRIAC, 0‑10V or other) for your dimmer and fixtures before installation to avoid compatibility issues.

• Dimmable — verify compatible dimmer type prior to installation
• Confirm dimmer protocol with project specifications or fixture documentation

Before you order

Confirm the model number and that a 24V, 60W driver meets your load and control requirements.

• Confirm model/SKU: DRVE24V60W
• Verify total connected wattage does not exceed 60W
• If dimming is required, verify the dimming protocol before ordering

Before You Order

Confirm the model number and quantity required. Verify that the 24V output and 60W capacity match the combined load of your LED fixtures and that the dimming protocol aligns with your control system.

• Confirm SKU: DRVE24V60W
• Verify total connected wattage does not exceed 60W
• Confirm required dimming protocol before installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVE24V60W Electronic Dimmable LED Driver 60W 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.