ELCO Lighting DRVE24V48DW Electronic Dimmable LED Driver 48W 24V DC

Product Overview

The ELCO Lighting DRVE24V48DW is an electronic dimmable LED driver that supplies up to 48W of regulated 24V DC output for low-voltage LED systems.

Use the DRVE24V48DW where a 24V DC, 48W dimmable power source is required—for example LED tape, modules and other low-voltage architectural lighting applications. Confirm dimmer compatibility and load requirements before wiring.

Key Features

• 48W maximum output capacity to the connected LED load
• 24V DC output voltage
• Dimmable with a compatible dimmer (confirm dimming protocol before installation)
• SKU: DRVE24V48DW — single-variant product

What this driver does

The DRVE24V48DW converts mains power to a regulated 24V DC output and is intended to power low-voltage LED loads up to 48 watts. It provides an electronic driver solution for LED tape, modules and compatible low-voltage fixtures.

• Delivers 24V DC output
• Rated for up to 48W total connected load

Typical applications

Use this driver where a compact 24V dimmable supply is required. Common applications include low-voltage LED tape and modular LED fixtures in architectural, retrofit and contractor stock scenarios.

• LED tape and linear modules
• Architectural accent or cove lighting
• Retrofit projects and contractor inventories

Electrical output and load matching

Match the connected LED load to the driver's 24V DC output and 48W maximum capacity. Do not exceed the rated wattage when summing LED loads.

• Output voltage: 24V DC
• Maximum output power: 48W
• Confirm total wattage of fixtures before wiring

Dimming and controls

The DRVE24V48DW is dimmable, but dimmer compatibility must be confirmed for each installation. Verify the required dimming protocol (for example ELV, TRIAC, 0–10V or another method) with the fixture manufacturer and the dimmer supplier before connecting controls.

• Dimmable (confirm control protocol and compatibility prior to installation)
• Ensure dimmer and driver protocols match to avoid performance issues

Ordering and project use

Confirm the exact model number and required quantity for your project. Use the listed specifications to match the driver to fixture schedules and system requirements.

• Model / SKU: DRVE24V48DW
• Brand: ELCO Lighting
• Product type: Electronic Dimmable LED Driver

Before You Order

Confirm the model number and quantity required before ordering. Verify the connected LED load's voltage and total wattage do not exceed the driver's 24V/48W rating, and confirm the required dimming protocol and dimmer compatibility for your control system.

• Confirm SKU DRVE24V48DW matches project schedule
• Verify total LED load ≤ 48W and voltage = 24V
• Confirm dimming protocol (ELV, TRIAC, 0–10V, etc.) before wiring

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVE24V48DW Electronic Dimmable LED Driver 48W 24V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.