ELCO Lighting DRVE12V96DW Electronic Dimmable LED Driver 96W 12V DC

Product Overview

The ELCO Lighting DRVE12V96DW is a 96W electronic dimmable LED driver that provides a 12V DC output for low-voltage LED lighting systems.

Use the exact model DRVE12V96DW to match fixture schedules, power requirements, and dimming controls on retrofit or new-construction projects.

Key Features

• 96W output capacity to power low-voltage LED loads
• 12V DC output suitable for LED tape, modules and low-voltage fixtures
• Dimmable with a compatible dimmer — confirm dimming protocol before installation
• Single SKU: DRVE12V96DW

What this driver does

The DRVE12V96DW converts line power to a regulated 12V DC output and delivers up to 96 watts to connected low-voltage LED loads. It is intended as the power source for 12V LED tape, modules and low-voltage fixtures that require an electronic dimmable driver.

Output and power capacity

Match the driver to your load using the rated output specifications. The DRVE12V96DW supplies 12V DC and a total output capacity of 96W.

• Output voltage: 12V DC
• Maximum output power: 96W (aggregate load across all outputs)

Dimming control and compatibility

This model is dimmable when used with a compatible dimmer. The specific dimming protocol (for example ELV/TRIAC or 0–10V) is not provided here; confirm the required dimming method and compatibility with the DRVE12V96DW before wiring.

• Dimming: Yes — verify dimmer type and compatibility prior to installation

Recommended applications

Use the DRVE12V96DW for low-voltage LED installations that require a centralized 12V DC supply and dimming capability.

• LED tape and linear LED modules
• Low-voltage architectural accent lighting
• Retrofit projects and contractor stock where a 12V 96W driver is specified

Before You Order

Confirm the model number and the total wattage and voltage required by your LED load before ordering. Verify the dimming protocol required by your control system and confirm it is compatible with the DRVE12V96DW.

• Confirm model: DRVE12V96DW
• Confirm total connected load does not exceed 96W at 12V DC
• Confirm required dimming protocol and dimmer compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVE12V96DW Electronic Dimmable LED Driver 96W 12V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.