ELCO Lighting DRVE12V60DW Electronic Dimmable LED Driver 60W 12V DC

Product Overview

The ELCO Lighting DRVE12V60DW is a 60W electronic dimmable LED driver that provides a 12V DC output for low-voltage LED lighting systems.

Use the exact SKU (DRVE12V60DW) and specified output when matching drivers to fixture schedules and project requirements; verify dimming protocol compatibility before installation.

Key Features

• 60W rated output capacity to power low-voltage LED loads
• 12V DC output for LED tape, modules and other 12V fixtures
• Dimmable with compatible dimmer (confirm dimming protocol prior to installation)
• Single SKU: DRVE12V60DW

What this driver does

The DRVE12V60DW converts mains power to a regulated 12V DC output and is rated to deliver up to 60 watts to connected low-voltage LED fixtures. It is intended for use where a dedicated 12V LED power source is required.

• Output: 12V DC
• Maximum delivered power: 60W
• Designed for LED tape, LED modules and other 12V LED loads

Suitable applications

Select this driver for low-voltage LED installations that require a 12V DC, 60W power source. Typical uses include architectural accent lighting, under-cabinet LED tape runs, module arrays and contractor stock for retrofit or new-construction projects.

• LED tape and strip lighting
• Low-voltage LED modules
• Architectural and accent lighting
• Retrofit and contractor supply

Dimming and load compatibility

The DRVE12V60DW is dimmable, but the specific dimming protocol (for example ELV/TRIAC or 0–10V) is not provided here. Confirm the required dimming method for your fixtures and the dimmer type before installation to ensure compatibility and proper operation.

• Verify dimmer protocol and compatibility with both driver and LED load before wiring
• Match the combined wattage of connected LED runs to the 60W output limit

Core specifications

Refer to the SKU and these verified core specifications when comparing products and preparing schedules.

• Brand: ELCO Lighting
• Model / SKU: DRVE12V60DW
• Product type: Electronic dimmable LED driver
• Output voltage: 12V DC
• Rated output power: 60W

Before You Order

Confirm the model number (DRVE12V60DW) and the total wattage and voltage requirements of the LED load before ordering. Verify the dimming protocol required by your dimmer and fixtures to ensure compatibility.

• Confirm total connected load does not exceed 60W
• Confirm fixtures require 12V DC
• Verify dimmer protocol (ELV/TRIAC, 0–10V, etc.) and driver compatibility

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for ELCO Lighting DRVE12V60DW Electronic Dimmable LED Driver 60W 12V DC. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.