BR230 - Eaton 30 Amp 120/240V 2 Pole Thermal Magnetic Circuit Breaker Plug-On BR Frame

Product Overview

The Eaton BR230 is a 2‑pole, 30 amp, 120/240V thermal‑magnetic circuit breaker designed for plug‑on installation in Eaton BR frame panels.

This listing is for the single SKU BR230 (new condition). Confirm model and quantity required before ordering.

Key Features

• 30 amp rating — two‑pole, protects multi‑wire or 240V circuits
• Thermal‑magnetic trip mechanism for overcurrent and short‑circuit protection
• Plug‑on design for Eaton BR frame distribution panels
• Manufacturer: Eaton; Part number/SKU: BR230

What this breaker does

The BR230 is a two‑pole circuit breaker that provides combined overcurrent protection across both poles. It is intended to protect 120/240V branch circuits and multi‑wire circuits where a two‑pole device is required.

• Protects 30 amp circuits at 120/240 volts
• Thermal‑magnetic trip provides response to prolonged overloads and instantaneous faults

Electrical rating and basic requirements

Use the BR230 where a 30 amp, 120/240V two‑pole breaker is specified. The product designation indicates thermal‑magnetic tripping characteristics and a 2‑pole configuration suitable for common residential and light commercial branch circuits.

• Ampere rating: 30 A
• Poles: 2 (two‑pole)
• Voltage: 120/240 V
• Trip type: Thermal‑magnetic

Mounting and panel compatibility

The BR230 is a plug‑on type breaker designed for Eaton BR frame panels. It installs by plugging into the panel bus and securing per panel manufacturer instructions.

• Plug‑on installation for Eaton BR frame distribution panels
• Intended for use in compatible Eaton panels; verify panel compatibility before installation

Ordering and model confirmation

This product page describes the single SKU BR230. Confirm the exact model number, panel compatibility, and quantity required before placing an order.

• Manufacturer: Eaton
• Part number / SKU: BR230
• Condition: New

Before You Order

Confirm the model number and quantity required before ordering. Verify panel compatibility and applicable local codes or installer requirements for breaker selection and replacement.

• Verify Eaton BR frame compatibility with your panel
• Confirm 30 A, 120/240 V two‑pole breaker matches circuit requirements
• Consult a qualified electrician for installation and code compliance

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for BR230 - Eaton 30 Amp 120/240V 2 Pole Thermal Magnetic Circuit Breaker Plug-On BR Frame. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.