Dottie 3/4 in x 12 in Carbide Tipped Masonry Drill Bit MD8XL

Product Overview

Carbide-tipped masonry drill bit by Dottie, model MD8XL, sized 3/4 in diameter by 12 in length.

Catalog identifiers included for procurement: UPC 00781002303183 and unit-of-measure Ea (standard quantity 1).

Key Features

• Manufacturer part number: MD8XL for purchase-order and inventory matching.
• Size/format: 3/4 in diameter × 12 in length.
• Construction: carbide tipped.
• Cataloged as a masonry drill bit suitable for tasks that require a 3/4 in hole in masonry substrates.

What this drill bit is for

The Dottie MD8XL is a carbide-tipped masonry drill bit sized 3/4 in × 12 in intended for drilling into masonry materials.

• Prepared for applications that require a 3/4 in hole in masonry substrates.
• Appropriate for contractor tool stock and field service kits where this size is needed.

Physical and catalog specifications

Use the identifiers below for procurement, receiving, and inventory control.

• Model / SKU: MD8XL
• Size / Format: 3/4 in × 12 in
• Material / Construction: Carbide Tipped
• UPC: 00781002303183
• Unit of Measure: Ea (standard quantity 1)
• Dottie Category: Masonry Drill Bits (Category Code 6320)

Typical applications

Common uses for this type of bit include drilling openings in masonry for conduit, boxes, anchors, or fasteners when a 3/4 in hole is specified.

• Electrical installation work where a 3/4 in masonry hole is required.
• Service and repair tasks involving masonry drilling.
• Contractor tool inventory for masonry drilling needs.

Compatibility and installation notes

Confirm part number, bit size, and tool compatibility before ordering or use.

• Use with rotary hammer or drill equipment appropriate for masonry/hammer drilling and with a compatible chuck or adapter.
• Follow the drill and tool manufacturer instructions and standard safe work practices when drilling masonry.
• Verify required hole diameter and depth for your specific conduit, box, anchor, or fastener application before use.

Before You Order

Confirm the model number and that a 3/4 in × 12 in carbide-tipped masonry bit matches the hole diameter and depth required for your application.

• Check tool compatibility and that your drill or rotary hammer is suitable for masonry/hammer drilling.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 3/4 in x 12 in Carbide Tipped Masonry Drill Bit MD8XL. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.