Dottie 5/8 in x 12 in Carbide Tipped Masonry Drill Bit MD7XL

Product Overview

The Dottie MD7XL is a 5/8 in x 12 in carbide‑tipped masonry drill bit designed for electrical installation and service tasks such as making holes for conduit, boxes, and fasteners.

This single‑SKU item is cataloged as MD7XL with UPC 00781002303145 and is sold each (UOM: Ea).

Key Features

• Size: 5/8 in diameter by 12 in length — specified for purchase-order matching.
• Carbide tipped cutting edge for drilling in masonry materials (manufacturer designation: Carbide Tipped).
• Manufacturer part number: MD7XL; UPC: 00781002303145 for inventory and procurement.
• Dottie category: Masonry Drill Bits; product family: Electrical Accessories / Installation Parts.
• Unit of measure: Each (Ea); standard quantity: 1.

Function and intended use

The Dottie MD7XL is intended for drilling in masonry materials during electrical installation and service work. Its carbide tip is the stated construction material for the cutting edge and is suited to create holes for conduit entries, electrical boxes, and fastener anchors when the listed size meets the job requirements.

• Designed for masonry drilling tasks related to electrical installation and maintenance
• Use with appropriate rotary hammer or hammer drill rated for masonry bits of this size

Key specifications and identifiers

Confirm these identifiers when specifying or reordering the exact SKU MD7XL.

• Model / SKU: MD7XL
• Size / Format: 5/8 in x 12 in
• Material / Construction: Carbide Tipped
• UPC: 00781002303145
• Unit of Measure: Ea (standard quantity 1)
• Dottie Category: Masonry Drill Bits

Common applications

The product data lists typical uses in electrical installation and contractor tool stock. Use this bit where a 5/8 in diameter masonry hole is required for conduit, boxes, or fastener placement.

• Conduit and junction box entry holes
• Preparing anchor or fastener locations in masonry
• Service and repair tasks involving masonry penetrations
• Contractor tool room replenishment

Compatibility and ordering guidance

Confirm the Dottie part number, the required drill size, and jobsite requirements before ordering. Use the bit with compatible drill equipment and follow safe work practices and the tool manufacturer's instructions.

• Verify MD7XL matches the job's required diameter and length before purchase
• Ensure your drill/hammer is suitable for 5/8 in carbide‑tipped masonry bits
• Follow appropriate PPE and manufacturer guidance during use

Before You Order

Confirm the model number (MD7XL), size (5/8 in x 12 in) and quantity required before ordering to ensure the bit matches the project's drill and hole requirements.

• Verify compatibility of your drill or hammer with a 5/8 in carbide‑tipped masonry bit.
• Match MD7XL to purchase orders or stock lists using the SKU and UPC for accurate procurement.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 5/8 in x 12 in Carbide Tipped Masonry Drill Bit MD7XL. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.