Dottie 1/4 in x 6 in Carbide Tipped Masonry Drill Bit MD2L

Product Overview

Dottie MD2L is a carbide‑tipped masonry drill bit sized 1/4 in x 6 in and cataloged for electrical installation and contractor tool stock.

Manufacturer part number MD2L and UPC 00781002303008 support purchase‑order matching and barcode‑based procurement.

Key Features

• Size/format: 1/4 in diameter x 6 in length
• Material/construction: carbide tipped
• Manufacturer part number: MD2L (SKU MD2L)
• UPC: 00781002303008
• Unit of measure: Each (standard quantity 1)
• Dottie category: Masonry Drill Bits

What this bit is used for

The Dottie MD2L carbide‑tipped masonry drill bit is cataloged for masonry drilling tasks in electrical and contractor contexts where a 1/4 in hole is required and a 6 in bit length is appropriate.

• Electrical installation and service work
• Conduit, box, or fastener hole preparation
• Contractor and facility tool stock

Key specifications and identifiers

Use these identifiers when ordering or matching to a parts list.

• Model / SKU: MD2L
• Size / Format: 1/4 in x 6 in
• Material / Construction: Carbide Tipped
• UPC: 00781002303008
• Product Type: Carbide Tipped Masonry Drill Bit
• Unit of Measure: Ea (standard quantity 1)

Typical applications

This bit is presented for use in masonry drilling tasks common to electrical and contractor work. Confirm the bit size matches the fastener, anchor, or conduit requirements for your project.

• Creating holes in masonry substrates when a 1/4 in hole is required
• Preparing mounting points for boxes or anchors sized to 1/4 in

Compatibility and installation notes

Confirm the part number and bit size before ordering. Use appropriate drills and follow drill manufacturer guidance and safe work practices when drilling masonry.

• Verify MD2L is the required size for your fastener, conduit, or box application before purchase
• Follow tool manufacturer guidance and appropriate safety practices when using masonry bits

Before You Order

Confirm the MD2L part number and 1/4 in x 6 in size match your project requirements before ordering.

• Check that a 1/4 in diameter and 6 in length are appropriate for your substrate and fastener or conduit.
• Ensure your drill and chosen drilling method are suitable for masonry and for use with carbide‑tipped bits.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 1/4 in x 6 in Carbide Tipped Masonry Drill Bit MD2L. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.