Dottie 1/4 Inch-20 X 2 Inch Phillips/Square Flat Head Machine Screw FMDD142 (50-Pack)

Product Overview

Dottie FMDD142 is a pack of 50 machine screws specified as 1/4"-20 x 2" with a Phillips/square drive and a flat (countersinking) head. The SKU and UPC support catalog identification for procurement and replacement.

This item is intended for electrical maintenance, contractor stock, and replacement applications where a confirmed Dottie part number and clear size description are required for ordering and inventory.

Key Features

• Part number: FMDD142 (Dottie)
• Item description: 1/4"-20 x 2" Phillips/Square flat head machine screw
• Pack quantity: 50 (unit of measure C; standard and sales unit quantity 50)
• UPC: 00781002654186 for barcode-based inventory
• Designed for contractor procurement, replacement, and electrical maintenance workflows

What this screw is used for

Direct answer: These screws are intended for fastening tasks in electrical maintenance, replacement work, and contractor stock where a 1/4"-20 x 2" machine screw with a flat head and Phillips/square drive is required.

They provide a catalog-identified replacement option when project specifications or purchase orders reference a Dottie part number.

• Common applications: electrical maintenance, panel work, equipment mounting where flat-head countersinking is required
• Procurement use: stocked as a contractor or service replacement part tied to the FMDD142 catalog identifier

Key specifications and identification

Direct answer: Confirm the following identifiers and basic specs when matching this SKU to job requirements.

• Brand: Dottie
• Model / SKU: FMDD142
• Item description: 1/4"-20 x 2" Phillips/Square flat head machine screw
• UPC: 00781002654186
• Pack quantity: 50 (unit of measure C; standard and sales unit quantity 50)
• Product type/category: Square/Slotted Machine Screw (category code 4020)

Compatibility and installation notes

Direct answer: Verify size, thread, drive type, and any project-specific requirements before ordering or installing these screws.

• Confirm 1/4"-20 thread, 2" length, and flat-head countersink are appropriate for the application
• Match the Dottie part number (FMDD142) and UPC to procurement or project documentation for accurate replacement
• Follow manufacturer guidance, project drawings, and applicable electrical or building codes for installation

Before You Order

Confirm the model number, quantity, and that a 1/4"-20 x 2" Phillips/Square flat-head machine screw meets the project requirements before ordering.

• Verify thread size (1/4"-20), length (2"), and head/drive type against the job specification.
• Match FMDD142 and UPC 00781002654186 to purchasing or inventory records to ensure correct replacement.
• Follow all applicable installation instructions and local codes when using this hardware.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 1/4 Inch-20 X 2 Inch Phillips/Square Flat Head Machine Screw FMDD142 (50-Pack). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.