Dottie 3/4 in Pipe & 1 in EMT Nail Strap D2 (100-Pack)

Product Overview

Dottie D2 is a nail strap designed to fasten and support 3/4 in pipe and 1 in EMT raceway. It is sold as a standard pack of 100 for contractor and supply use.

This SKU is cataloged for purchase-order matching (Manufacturer part D2, UPC 00781002276609). Confirm trade size and local code requirements before installation.

Key Features

• Designed for 3/4 in pipe and 1 in EMT conduit support
• Manufacturer part number: D2 (SKU D2)
• Standard UPC: 00781002276609 for barcode receiving
• Pack quantity: 100 per unit of measure (M)
• Dottie product category: Nail Straps — for conduit/raceway fastening

What this nail strap is for

The Dottie D2 nail strap fastens and supports 3/4 in pipe and 1 in EMT raceway to structural surfaces using a nail or screw. It provides a simple mechanical attachment point for conduit runs during rough-in, maintenance, or retrofit work.

• Intended for securing EMT, pipe, and similar raceways sized to the indicated trade size.
• Used where strap-style conduit support is specified in project drawings or material lists.

Typical applications

Use this strap in electrical contractor supply, service, and installation contexts where 3/4 in pipe or 1 in EMT must be supported. Common uses include rough-in framing, branch circuits, and general raceway routing.

• EMT and pipe fastening
• Raceway support in commercial or residential installations (subject to local codes)
• Contractor strap stock and replenishment packs

Key product specifications

The following product facts identify this exact SKU for ordering and inventory purposes.

• Brand: Dottie
• Model / SKU: D2
• Size / Format: 3/4 in Pipe (listed also for 1 in EMT)
• UPC: 00781002276609
• Unit of Measure / Standard Quantity: M / 100
• Product Type / Category: Nail Strap / Nail Straps (Conduit / Raceways / Fittings)

Compatibility and installation notes

Confirm trade size, conduit type, and local electrical code requirements before specifying or installing this strap. Match the Dottie part number (D2) and listed size to the project bill of materials to ensure proper fit.

• Verify that 3/4 in pipe or 1 in EMT is the correct trade size for the planned installation.
• Check fastener type and substrate suitability (nail or screw) per job conditions and code.
• Confirm quantity required versus pack size (100) when ordering.

Before You Order

Confirm the model number and quantity required before ordering. Verify trade size and local code requirements to ensure this strap is appropriate for your installation.

• Match Dottie part number D2 to your bill of materials.
• Verify 3/4 in pipe or 1 in EMT is the intended conduit size.
• Plan ordering in multiples of the pack quantity (100) as needed.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Dottie 3/4 in Pipe & 1 in EMT Nail Strap D2 (100-Pack). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.