Diode LED LO-PRO Small NEMA3R Wet Location Junction Box and Driver Combo - 24V VLM Constant Voltage Driver - 60W (VLM60W-24-LPS3R)

Product Overview

The Diode LED VLM60W-24-LPS3R is a 60 W, 24 VDC constant-voltage LED driver integrated into a low‑profile LO‑PRO NEMA3R junction box. It provides regulated 24 V output for low-voltage LED tape and fixtures and is rated for damp and wet-location installations.

This single‑SKU assembly combines a compact power supply and a wiring/junction box to simplify installation in commercial and residential low‑voltage lighting applications. Confirm connected load does not exceed 60 W at 24 VDC.

Key Features

• 60 W maximum output at 24 VDC (constant‑voltage)
• Integrated LO‑PRO junction box (combines driver and wiring box)
• NEMA3R wet‑location rating suitable for damp and wet sites
• Designed for LED tape and low‑voltage LED fixtures on managed lighting circuits

Function and intended use

The VLM60W-24-LPS3R is a regulated constant‑voltage power supply built to drive 24 V LED tape and compatible low‑voltage LED fixtures. It is intended for use on managed lighting circuits where a stable 24 VDC source is required.

• Drives LED tape and fixtures that accept 24 VDC constant voltage
• Designed for commercial and residential lighting, new construction and retrofit projects

Electrical output and load limits

This SKU delivers a maximum of 60 watts at 24 VDC. Do not exceed the rated output when specifying loads or combining LED runs.

• Output type: constant voltage
• Output voltage: 24 VDC
• Maximum wattage: 60 W — size your connected LED load accordingly

Location rating and installation environment

The assembly is rated for wet locations (NEMA3R), supporting installations in damp and wet sites where a protected junction box and driver are required.

• NEMA3R wet‑location rating — suitable for damp and wet installations
• Appropriate for indoor and certain outdoor applications where NEMA3R protection is acceptable

Enclosure, mounting and wiring notes

The driver is built into a LO‑PRO junction box to combine the power supply and wiring compartment in a low‑profile package, simplifying mounting and wiring in constrained spaces.

• Integrated LO‑PRO junction box reduces need for a separate wiring enclosure
• Confirm wiring methods, conduit, and local electrical code requirements during installation

Before You Order

Confirm the model number and quantity required before ordering. Verify that the total connected LED load does not exceed 60 W at 24 VDC and that a NEMA3R enclosure meets the site’s environmental requirements.

• Confirm compatibility with your 24 V LED tape/fixtures
• Verify required wiring methods and local electrical code compliance
• If unsure about installation or load calculations, consult an electrician or lighting professional

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED LO-PRO Small NEMA3R Wet Location Junction Box and Driver Combo - 24V VLM Constant Voltage Driver - 60W (VLM60W-24-LPS3R). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.