Diode LED LO-PRO Junction Box and Driver Combo - 24V VLM Driver - 60W (VLM60W-24-LPS)

Product Overview

The Diode LED VLM60W-24-LPS is a 60 W constant-voltage LED driver that provides a regulated 24 VDC output for low-voltage LED tape and fixtures.

The unit accepts 120 or 277 VAC input and includes an integrated LO-PRO junction box that combines the driver electronics and wiring enclosure in a single low-profile housing.

Key Features

• 60 W maximum output at 24 VDC (constant-voltage)
• Input: 120 / 277 VAC
• Integrated LO-PRO junction box (low-profile driver + wiring box)
• Regulated constant-voltage output for stable 24 V operation

What this driver does

The VLM60W-24-LPS converts 120/277 VAC line input to a regulated 24 VDC constant-voltage output to power 24 V LED tape and compatible 24 V fixtures up to 60 W total.

• Provides regulated 24 VDC output for LED modules and tape
• Rated for up to 60 W total connected load

Electrical input and output

The driver accepts either 120 VAC or 277 VAC input and provides a 24 VDC constant-voltage output with a maximum power capacity of 60 W.

• Input voltage: 120 / 277 VAC
• Output voltage: 24 VDC (constant-voltage)
• Maximum output power: 60 W — do not exceed this rating

Integrated junction box and mounting

The integrated LO-PRO junction box houses the driver electronics and wiring connections in a single low-profile enclosure intended to simplify installations where a combined driver and junction box is acceptable.

• Low-profile housing integrates driver and wiring enclosure
• Designed to provide a combined driver and junction box solution

Application considerations and load limits

Use this driver when a 24 VDC constant-voltage supply up to 60 W is required. Verify that connected LED products are compatible with a 24 VDC constant-voltage source and that their combined wattage does not exceed 60 W.

• Confirm all connected fixtures/tape are rated for 24 VDC constant-voltage
• Ensure total connected wattage ≤ 60 W

Before You Order

Confirm the model and ensure the total connected LED load does not exceed 60 W at 24 VDC.

• Verify site supply is 120 VAC or 277 VAC
• Calculate total LED wattage to ensure it does not exceed 60 W
• Confirm connected LED products are compatible with a 24 VDC constant-voltage driver

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED LO-PRO Junction Box and Driver Combo - 24V VLM Driver - 60W (VLM60W-24-LPS). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.