Diode LED VALENT X 500 Wet Location Strip Light 24V 100 ft Spool

Product Overview

The Diode LED DI-24V-VLX5-24-W100 is a 24V low-voltage VALENT X 500 tape light supplied on a 100 ft spool. It is specified at 466 lumens per foot at 2400K and draws 4.6 W per foot.

Rated IP65 for wet-location use and UL Listed to 2108, the tape is field-cuttable at 1.32 in intervals and is specified for single runs up to 30 ft. A compatible constant-voltage driver is required and should be sized above the total run wattage.

Key Features

• 466 lm/ft at 2400K
• 4.6 W per foot (24V constant-voltage)
• Cut points every 1.32 in
• Single run maximum: 30 ft
• Field dimmable (requires a compatible dimmable constant-voltage driver)
• Wet-location rated — IP65
• UL Listed to 2108

What this tape light does

The DI-24V-VLX5-24-W100 provides linear illumination for task, accent, and display lighting applications. The 2400K SKU is specified at 466 lumens per foot and operates on a 24V constant-voltage platform.

Common uses documented for this tape format include under-cabinet and shelf task lighting, cove and millwork accent lighting, and display or retail applications.

• Output: 466 lm/ft
• Color temperature: 2400K
• Power draw: 4.6 W/ft

Electrical and driver requirements

This product is a 24V constant-voltage tape and requires a compatible 24V constant-voltage driver. The driver should be sized above the total wattage of the assembled run (total feet × 4.6 W/ft).

Field dimming is supported when using a dimming-compatible constant-voltage driver and appropriate control method.

• Voltage: 24V constant-voltage
• Wattage: 4.6 W per foot — use to calculate driver sizing
• Dimming: supported with a compatible dimmable constant-voltage driver/control

Cutting, runs, and installation considerations

The tape is field-cuttable with cut points every 1.32 in to accommodate cabinet lengths and custom runs. The manufacturer specifies single runs up to 30 ft.

Follow project requirements for terminating and protecting field cuts and connections to preserve the product's location rating.

• Cut interval: 1.32 in
• Maximum single run: 30 ft
• Supplied on a 100 ft spool

Environmental rating and certification

The product is rated IP65 for indoor and outdoor wet-location environments where protection from water spray is needed.

It is UL Listed to standard 2108 for low-voltage luminaires.

• Location rating: IP65 (wet-location)
• Certification: UL Listed 2108

Before You Order

Confirm the SKU and color temperature before ordering; this page describes the 2400K SKU DI-24V-VLX5-24-W100 on a 100 ft spool.

• Verify driver: choose a 24V constant-voltage driver sized above the run wattage (total feet × 4.6 W/ft).
• Plan terminations and waterproofing for field cuts to maintain the IP65 rating.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT X 500 Wet Location Strip Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.