Diode LED VALENT X 300 High Output Tape Light 24V 16 4 ft Spool

Product Overview

The Diode LED VALENT X 300 tape light (SKU DI-24V-VLX3-20-016) is a 24VDC interior LED tape intended for task, accent, and display lighting. It delivers rated output on a low-voltage platform and is supplied on a 16.4 ft spool.

This SKU is the 2000K color temperature option, providing very warm light for applications where a warm/amber tone is desired.

Key Features

• 24VDC constant-voltage tape light — for use with 24V drivers
• 2.8 watts per foot — use to calculate total run wattage
• Cut intervals every 1.32 inches for precise termination to cabinet and millwork lengths
• Available in ultra-warm 2000K color temperature (this SKU: DI-24V-VLX3-20-016)

What this tape light does

The DI-24V-VLX3-20-016 is a low-voltage LED tape intended to provide rated, consistent output for interior linear lighting. It is supplied on a 16.4 ft spool and produces very warm light at 2000K for warm accenting or low-glare task illumination.

• Intended for interior task, accent, and display lighting
• Operates on a 24VDC constant-voltage platform

Suitable applications

Typical applications listed for this product include under-cabinet and shelf task lighting, cove and millwork accent lighting, and display or retail lighting.

• Under-cabinet and shelf lighting
• Cove and millwork accents
• Display and retail lighting

Electrical and driver requirements

The product requires a 24VDC constant-voltage driver. Select a driver with rated output above the total run wattage to avoid overloading the driver.

• Nominal voltage: 24VDC
• Power draw: 2.8 W per foot — multiply by run length to determine total load
• Requires a 24V constant-voltage driver sized above the calculated run wattage

Cut intervals and run configuration

The tape can be cut at the specified intervals to fit cabinets, shelving, and custom millwork. Use appropriate termination and connection methods at cut points.

• Cut points every 1.32 inches
• Supplied on a 16.4 ft spool for continuous runs

Before You Order

Confirm the model number and color temperature before ordering, and ensure you will use a 24VDC constant-voltage driver sized above the total run wattage.

• Verify required run length and number of spools needed
• Calculate total wattage: 2.8 W/ft × run length to select an appropriately rated 24V driver

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT X 300 High Output Tape Light 24V 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.