Diode LED VALENT Warm Dim Wet Location LED Tape Light 400lm 16 4 ft Spool

Product Overview

Diode LED VALENT warm‑dim LED tape light supplied on a 16.4 ft (5 m) spool. Provides high color fidelity with 90+ CRI on a low‑voltage, constant‑voltage platform for task, accent, and display lighting.

Consumes 4.4 W per foot and is available in two warm‑dim starting CCT options (2700K→1800K or 3000K→1800K). Requires a matching constant‑voltage driver sized above the total run wattage.

Key Features

• 90+ CRI for accurate color rendering
• Warm‑dim behavior — starting CCT options: 2700K→1800K or 3000K→1800K
• 16.4 ft (5 m) spool for continuous runs and field trimming at manufacturer‑specified cut points
• 4.4 W per foot for straightforward run‑wattage calculations
• Low‑voltage constant‑voltage tape format (verify suitability for your environment and installation)

What this product does

The Diode LED VALENT warm‑dim tape light is a low‑voltage, constant‑voltage LED strip supplied on a 16.4 ft (5 m) spool for continuous runs. It is intended for task, accent, and display lighting where high color fidelity is desired.

• Supplied on a 16.4 ft (5 m) spool for continuous mounting and trimming at manufacturer‑specified cut points
• Common uses include under‑cabinet task lighting, cove and millwork accents, and retail or display illumination

Performance and light quality

This tape light provides a CRI of 90+ and draws 4.4 W per foot. The warm‑dim feature reduces correlated color temperature to 1800K to create a warmer appearance when dimmed.

• Power draw: 4.4 W/ft — use this to calculate total run wattage
• CRI: 90+ for accurate rendering of finishes and merchandise
• Warm‑dim range: either 2700K→1800K or 3000K→1800K depending on SKU

Electrical and driver requirements

This product is a constant‑voltage (low‑voltage) LED tape and requires a compatible constant‑voltage driver. Size the driver above the total wattage of the run (total feet × 4.4 W/ft).

• Requires a constant‑voltage driver (verify correct output voltage before installation)
• Confirm dimmer/control compatibility with the chosen driver and tape before installation

Available color temperature options

Two warm‑dim starting correlated color temperature (CCT) options are offered. Each SKU corresponds to one starting CCT and both dim to 1800K.

• SKU DI-24V-VL4-WD2718-W016 — 2700K → 1800K warm‑dim
• SKU DI-24V-VL4-WD3018-W016 — 3000K → 1800K warm‑dim

Recommended applications

This high‑CRI, warm‑dim tape light is suitable where accurate color rendering and a warm dimming effect are desired. Typical uses include under‑cabinet task lighting, cove and millwork accent lines, and retail/display lighting.

• Under‑cabinet and shelf task lighting
• Cove, valance, and millwork accent lighting
• Display cases and retail shelf lighting

Before You Order

Confirm the exact SKU and warm‑dim start CCT required for your project and ensure you have a compatible constant‑voltage driver sized above the total run wattage.

• Select DI-24V-VL4-WD2718-W016 for 2700K→1800K or DI-24V-VL4-WD3018-W016 for 3000K→1800K
• Verify driver voltage and wattage sizing and confirm dimmer/control compatibility if dimming is required

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT Warm Dim Wet Location LED Tape Light 400lm 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.