Diode LED VALENT 500 Wet Location LED Tape Light 24V 100 ft Spool

Product Overview

The Diode LED VALENT 500 Wet Location LED Tape Light (SKU DI-24V-VL5-24-W100) is a 24V low-voltage tape light supplied on a 100 ft spool for linear interior lighting.

This SKU is the 2400K color temperature option in the VALENT 500 wet-location family and requires a constant-voltage 24V driver sized above the run wattage.

Key Features

• 24V low-voltage tape light on a 100 ft spool
• Part of the VALENT 500 wet-location product family
• 2400K color temperature (very warm white)
• Typical uses: under-cabinet, cove, millwork, and display lighting
• Requires a constant-voltage 24V driver sized above the run wattage

Function and intended uses

This SKU is a VALENT 500 wet-location LED tape light provided on a 100 ft spool for continuous linear interior lighting. It is commonly used for under-cabinet task lighting, cove and millwork accents, and retail or display illumination.

• Common placements: under cabinets, shelving, cove profiles, display cases, and millwork.
• Supplied on a spool for long continuous runs or bulk installations.

Electrical and driver requirements

The DI-24V-VL5-24-W100 is a 24V constant-voltage tape light and requires a compatible constant-voltage 24V driver. Select a driver with an output rating above the total wattage of the installed run.

• Voltage: 24V DC (constant-voltage driver required).
• Driver selection: choose a driver rated higher than the cumulative wattage of the tape run.

Product configuration and color temperature

This SKU corresponds to the 2400K color temperature option in the VALENT 500 wet-location family and is supplied on a 100 ft spool intended for continuous runs.

• SKU: DI-24V-VL5-24-W100
• Color temperature: 2400K
• Format: 100 ft spool

Installation and ordering considerations

Plan runs, cut points, and power entry locations before installation. Follow manufacturer guidance for maximum run length and cut points and place power supplies sized appropriately for the total load.

• Confirm maximum run length and cut points per manufacturer's guidance.
• Verify driver placement and wattage capacity for the total run.
• Confirm sealing/mounting methods for wet-location designation as required for the project.

Before You Order

Confirm the exact SKU (DI-24V-VL5-24-W100), color temperature, and that you have a compatible constant-voltage 24V driver sized above the total run wattage.

• Verify driver type and total wattage requirements for the planned run.
• Confirm 100 ft spool format fits your installation layout.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT 500 Wet Location LED Tape Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.