Diode LED VALENT 200 Wet Location LED Tape Light 24V 100 ft Spool

Product Overview

The Diode LED DI-24V-VL2 series is a 24V low-voltage LED tape light supplied on a 100 ft spool and intended for interior linear lighting tasks and accents.

Available in multiple color temperatures (2400K, 2700K, 3000K, 3500K, 4000K, 5000K) as distinct SKUs. Requires a 24V constant-voltage driver sized above the installed run wattage.

Key Features

• 24V constant-voltage LED tape light on a 100 ft spool
• Offered in six color temperatures: 2400K, 2700K, 3000K, 3500K, 4000K, 5000K (each SKU corresponds to one CCT)
• Intended for interior task and accent lighting such as under-cabinet, cove, and display lighting
• Sold as a spool; requires a properly sized constant-voltage driver

What this tape light is for

The DI-24V-VL2 tape light is a low-voltage linear LED product supplied on a 100 ft spool for interior lighting tasks and accent runs.

• Continuous linear illumination for task and accent lighting
• Suitable where spool-mounted tape runs are specified

Color temperature and SKU options

This product family is offered as individual SKUs by color temperature. Select the SKU that matches your desired white point.

• DI-24V-VL2-24-W100 — 2400K
• DI-24V-VL2-27-W100 — 2700K
• DI-24V-VL2-30-W100 — 3000K
• DI-24V-VL2-35-W100 — 3500K
• DI-24V-VL2-40-W100 — 4000K
• DI-24V-VL2-50-W100 — 5000K

Power and driver requirements

The DI-24V-VL2 series runs on a 24V constant-voltage system. Use a constant-voltage driver sized above the total wattage of the installed run.

• Requires a 24V constant-voltage driver (driver not included)
• Select a driver with capacity greater than the total run wattage

Typical installation locations

Use this spool-format tape light for interior installations where flexible linear illumination is needed. Confirm mounting substrate and thermal conditions as part of specification.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting runs

Before You Order

Confirm the exact SKU for the required color temperature and verify the total run wattage so you can specify a 24V constant-voltage driver sized above the run load.

• Verify CCT: choose the correct SKU (2400K, 2700K, 3000K, 3500K, 4000K, or 5000K).
• Confirm driver compatibility and wattage sizing before purchase.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT 200 Wet Location LED Tape Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.