Diode LED STREAMLITE Tape Light 24V 16 4 ft Spool with OMNIDRIVE X
Description
Product Overview
The Diode LED STREAMLITE tape light is a 24VDC low-voltage linear lighting product supplied on a 16.4 ft (5 m) spool. It draws 3.3 W per foot and has cut points every 1.8 inches.
Available in 2700K, 3000K, 3500K, and 4000K color temperatures. Use with a 24V constant-voltage driver sized above the total run wattage.
Key Features
- 24VDC constant-voltage tape light on a 16.4 ft (5 m) spool
- 3.3 W per foot
- Cut points every 1.8 inches
- Available in 2700K, 3000K, 3500K, and 4000K
What this tape light is for
Direct answer: The STREAMLITE tape light is intended for interior linear lighting applications such as under-cabinet, cove, millwork accent, and display lighting.
Its 24V low-voltage platform and specified 3.3 W/ft power draw make run length and driver sizing predictable.
- Typical interior uses: under-cabinet task lighting, cove and millwork accent, shelf or display illumination
- Intended for interior (indoor) installations
Electrical performance and power
Direct answer: The tape light operates at 24VDC and consumes 3.3 watts per foot.
Calculate total run wattage by multiplying 3.3 W/ft by the installed length; select a 24V constant-voltage driver with capacity above that total.
- Voltage: 24VDC
- Power draw: 3.3 W per foot
- Driver requirement: 24V constant-voltage driver sized above calculated run wattage (driver sold separately)
Length, cut intervals, and color options
Direct answer: Each spool contains 16.4 ft (5 m) of tape light with cut points every 1.8 inches.
Four color-temperature SKU variants are available; choose the SKU matching the desired white appearance.
- Spool length: 16.4 ft (5 m)
- Cut interval: 1.8 in
- Color temperature SKUs: DI-KIT-24V-STMLTODX60-2700 (2700K), -3000 (3000K), -3500 (3500K), -4000 (4000K)
Driver and installation notes
Direct answer: A 24VDC constant-voltage driver is required and is not included.
Plan terminations and wiring before cutting. Confirm the driver you select provides the required output and capacity for the total run.
- Requires 24V constant-voltage driver (not included)
- Size driver: total feet × 3.3 W/ft, then select a 24V driver with higher capacity
- Confirm correct SKU and quantity before ordering
Before You Order
Confirm the correct SKU for the desired color temperature and that you will supply a 24V constant-voltage driver sized above the run wattage.
- Verify model number for chosen CCT: DI-KIT-24V-STMLTODX60-2700 / -3000 / -3500 / -4000
- Calculate driver size: total feet × 3.3 W/ft, then select a 24V driver with higher capacity
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Diode LED STREAMLITE Tape Light 24V 16 4 ft Spool with OMNIDRIVE X. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Diode LED |
|---|---|
| Available Finishes / SKUs | DI-KIT-24V-STMLTODX60-2700; DI-KIT-24V-STMLTODX60-3000; DI-KIT-24V-STMLTODX60-3500; DI-KIT-24V-STMLTODX60-4000 |
| Product Title | Diode LED STREAMLITE Tape Light 24V 16.4 ft Spool with OMNIDRIVE X |
| Product Type | LED Tape Light |
| Voltage | 24VDC |
| Wattage | 3.3 W per ft |
| Cut Interval | 1.8 in |
| Spool Length | 16.4 ft (5 m) |
| Available Color Temperatures | 2700K, 3000K, 3500K, 4000K |
Comments










