Diode LED STREAMLITE Tape Light 24V 16 4 ft Spool

Product Overview

The Diode LED DI-24V-STMLT-27-016 STREAMLITE is a 24VDC low-voltage LED tape light supplied on a 16.4 ft spool. It produces 288 lumens per foot at 2700K with a CRI of 90+.

This tape light draws 3.3 W/ft, features 2.5 in cut intervals, a 180° beam angle, and is rated for indoor/damp locations. It requires a 24VDC constant-voltage driver sized above the total run wattage.

Key Features

• Model: DI-24V-STMLT-27-016 — 2700K color temperature
• Light output: 288 lm/ft at 2700K
• Power: 3.3 W/ft on a 24VDC platform
• Color rendering: 90+ CRI
• Maximum single run (spooled length): 16.4 ft
• Cut interval: every 2.5 in
• Beam angle: 180°
• Location rating: Indoor / Damp locations; UL Listed
• Dimmable (with compatible dimming drivers/controllers)

What this tape light is for

The DI-24V-STMLT-27-016 is designed for interior task, accent, and display lighting where warm white (2700K) illumination and high color fidelity are desired.

Typical uses include under-cabinet and shelf task lighting, cove and millwork accent lighting, and linear display or retail lighting in indoor or damp-rated locations.

• 2700K warm white output
• 90+ CRI for improved color rendering
• Supplied on a 16.4 ft spool for continuous runs

Light output and color quality

This SKU produces 288 lumens per foot at 2700K with a CRI of 90+, and a 180° beam angle for broad illumination.

• 288 lm/ft at 2700K
• 90+ CRI
• 180° beam angle

Electrical and driver requirements

The tape light operates on 24VDC and consumes 3.3 watts per foot. Use a 24VDC constant-voltage driver sized above the total wattage of the installed run.

• Voltage: 24VDC
• Power: 3.3 W/ft — calculate driver capacity as total feet × 3.3 W
• Dimmable when paired with compatible 24V dimming drivers or controllers

Cutting, runs, and mounting considerations

The tape has 2.5 in cut intervals and is supplied on a 16.4 ft spool. Follow standard low-voltage tape light termination and connection practices for safe installation.

• Cut points: every 2.5 in
• Max single spool length: 16.4 ft — plan feed points and driver placement accordingly
• Physical dimensions: width 0.31 in, height 0.13 in

Before You Order

This page describes the 2700K variant on a 16.4 ft spool (DI-24V-STMLT-27-016).

• Requires a 24VDC constant-voltage driver sized above the run wattage (total feet × 3.3 W/ft).
• Plan feed points for the spool length and follow standard termination practices.
• Other color temperature SKUs are available in the same product family (3000K, 3500K, 4000K).

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED STREAMLITE Tape Light 24V 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.