Diode LED OBD Flex Optics LED Strip Light Asymmetric 24V 90CRI 16 4 ft Spool

Product Overview

24VDC LED tape light on a 16.4 ft spool for interior task, accent, and display lighting.

Asymmetrical optics with a rated output of 5.5 W per foot and cut intervals every 6.56 in for field termination.

Key Features

• 24VDC constant-voltage LED tape light (requires a compatible 24VDC driver)
• Power draw: 5.5 W per foot
• Asymmetrical beam optics for directed illumination
• Cut points every 6.56 in for termination at cabinet or millwork lengths
• Available color temperatures: 2700K, 3000K, 3500K, 4000K

Function and intended use

This Diode LED OBD Flex Optics tape light is a low-voltage linear light source intended for interior task, accent, and display lighting. It is supplied on a 16.4 ft spool and is described for applications needing consistent color and rated output.

• Typical uses: under-cabinet task lighting, shelf and display illumination, cove and millwork accent lighting
• Intended for interior installations

Electrical load and driver sizing

The tape light has a nominal power draw of 5.5 W per foot on a 24VDC constant-voltage platform. Use this value to calculate total run wattage.

• Nominal power: 5.5 W/ft
• Requires a 24VDC constant-voltage driver sized above the total run wattage

Beam type and common applications

The product uses asymmetrical optics to provide directed output rather than an even wash, which can be useful for task and accent applications.

• Beam: Asymmetrical (directed output)
• Applications: under-cabinet and shelf task lighting, cove/millwork accents, retail/display illumination

Cut intervals and spool length

The tape light includes repeatable cut points so runs can be terminated to match cabinet or millwork lengths.

• Cut interval: 6.56 in (cut only at designated points)
• Spool length: 16.4 ft

SKUs and color temperature options

Select the SKU that corresponds to the color temperature required for your project. Electrical and mechanical characteristics are consistent across the available color options.

• DI-24V-OBD4-27K-AS-016 — 2700K
• DI-24V-OBD4-30K-AS-016 — 3000K
• DI-24V-OBD4-35K-AS-016 — 3500K
• DI-24V-OBD4-40K-AS-016 — 4000K

Before You Order

Confirm the required SKU/color temperature and size a 24VDC constant-voltage driver above the calculated run wattage before ordering.

• Verify spool length and quantity needed for your run
• Driver must be 24VDC constant-voltage and sized to exceed total run wattage (5.5 W/ft × run length)
• Confirm cutpoint spacing (6.56 in) meets field-length requirements

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED OBD Flex Optics LED Strip Light Asymmetric 24V 90CRI 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.