Diode LED Tape Light Terminal Block Connector, Screw Down, 8mm, Tape-To-Wire, White - Pack of 25 individually bagged, 25 Pack (DI-TB-CONN-TTW-25)
Description
Product Overview
The Diode LED DI-TB-CONN-TTW-25 is a pack of 25 screw-down tape-to-wire terminal block connectors for 8 mm LED tape. The compact white bodies are sized to fit shallow channels and tight corners for interior low-voltage installations.
These connectors provide a solderless connection by clamping the tape conductors and feed wire. They accept 16–20 AWG copper conductors and are rated for 12–24VDC with manufacturer-specified maximum amperage.
Key Features
- Screw-down terminals for solderless tape-to-wire connections
- Compatible with 8 mm LED tape only
- Accepts 16–20 AWG copper wire
- Voltage rating: 12–24VDC (manufacturer max amperage: 12V — 5 A; 24V — 4 A)
- Compact dimensions (0.45" × 0.4" × 0.3") for shallow channels
- Supplied as 25 individually bagged connectors
- White finish
- Manufacturer five-year limited warranty
What this connector does
Direct answer: The DI-TB-CONN-TTW-25 provides a solderless, screw-down connection between 8 mm LED tape and external feed wire.
It is used to clamp the tape conductors and the feed wire to create an electrical connection without soldering, suitable for interior low-voltage tape installations and field repairs.
- Designed for tape-to-wire connections for 8 mm tape.
- Useful where a compact connector is needed for shallow channels or tight corners.
Compatibility and electrical ratings
Direct answer: Use this connector only with 8 mm LED tape and copper conductors between 16 AWG and 20 AWG; the product is rated for 12–24VDC.
Manufacturer maximum continuous amperage: 5 A at 12 V and 4 A at 24 V. Plan runs and junctions so the current does not exceed these ratings.
- Compatible tape width: 8 mm only.
- Voltage: 12–24VDC.
- Wire gauge: 16–20 AWG (copper conductors only).
- Max amperage: 12V — 5 A; 24V — 4 A.
Installation and safety notes
Direct answer: Follow national and local electrical codes and the manufacturer's installation guidance; the manufacturer specifies installation by a qualified, licensed electrician when required.
The manufacturer specifies use with a Class 2 DC constant-voltage LED driver and copper wiring rated for at least 176°F (80°C). Do not modify the product beyond instructions.
- Use with Class 2 DC constant-voltage LED drivers only.
- Use copper conductors rated ≥176°F (80°C).
- Attached leads and extensions are not rated for in-wall installation unless otherwise noted—follow local code.
- Ambient temperature rating: −4°F to 122°F (−20°C to 50°C).
Physical size and packaging
Direct answer: Each connector measures 0.45" × 0.4" × 0.3" (L × W × H), has a white finish, and is supplied as 25 individually bagged pieces.
The compact body is intended to fit shallow channels and tight corners where larger connectors may not fit.
- Dimensions: 0.45" × 0.4" × 0.3" (L × W × H).
- Finish: white.
- Package quantity: 25 connectors (model DI-TB-CONN-TTW-25).
Before You Order
Confirm tape width (8 mm) and that planned current per connector does not exceed the manufacturer's amperage ratings before ordering.
- Verify LED tape is 8 mm width—this connector is not compatible with other widths.
- Confirm feed wire is copper and between 16–20 AWG.
- Plan wiring and driver selection so the current per connector stays within the stated max amperage.
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Diode LED Tape Light Terminal Block Connector, Screw Down, 8mm, Tape-To-Wire, White - Pack of 25 individually bagged, 25 Pack (DI-TB-CONN-TTW-25). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Diode LED |
|---|---|
| SKU | DI-TB-CONN-TTW-25 |
| Product type | Tape light terminal block connector (tape-to-wire) |
| Connection | Screw-down terminals, tape-to-wire |
| Compatible Tape Width | 8 mm |
| Voltage | 12–24VDC |
| Maximum Amperage | 12V — 5 A; 24V — 4 A |
| Wire gauge | 16–20 AWG (copper only) |
| Dimensions | 0.45" × 0.4" × 0.3" (L × W × H) |
| Operating Temperature | −4°F to 122°F (−20°C to 50°C) |
| Finish | White |
| Package quantity | 25 (individually bagged) |
| Warranty | 5-year limited warranty (see Diode LED for details) |
Comments






