Diode LED Tape Light Terminal Block Connector, Screw Down, 8mm, Tape-To-Tape, White - Pack of 25 individually bagged, 25 Pack (DI-TB-CONN-TTT-25)

Product Overview

The Diode LED DI-TB-CONN-TTT-25 is a screw‑down tape‑to‑tape terminal block connector for 8 mm LED tape that enables solderless joins between two tape runs.

Sold as a pack of 25 connectors, it accepts 16–20 AWG copper conductors and is rated for 12–24VDC with manufacturer‑specified maximum amperages.

Key Features

• Screw‑down terminals clamp tape and wire without soldering
• Compatible with 8 mm LED tape only
• Accepts 16 AWG to 20 AWG copper wire
• Voltage rating: 12–24VDC (Max. amperage: 5A at 12V / 4A at 24V)
• Compact dimensions: 0.45" x 0.4" x 0.3" (L x W x H)
• Pack of 25 connectors, individually bagged
• Indoor use; ambient temperature range −4° to 122°F (−20° to 50°C)
• 5‑year limited warranty per manufacturer

What this connector does

The DI-TB-CONN-TTT-25 provides a solderless electrical and mechanical connection between two runs of 8 mm LED tape using screw‑down terminals that secure the tape and copper conductors.

• Solderless tape‑to‑tape connection for 8 mm LED tape
• Screw terminals secure both tape and wire
• Supplied as a 25‑pack for multi‑run projects

Electrical ratings and wire requirements

The connector is specified for 12–24VDC systems. Observe the manufacturer's maximum amperage ratings and use copper wiring rated for the temperatures specified by the manufacturer.

• Voltage: 12–24VDC
• Maximum amperage: 5A at 12V; 4A at 24V
• Accepts 16 AWG to 20 AWG copper wire only
• Use with Class 2 DC constant‑voltage LED drivers as required by the manufacturer

Size, fit, and mounting considerations

With a compact footprint, the connector is intended for indoor installations where space is limited. Verify fit with your chosen channel or mounting location before installation.

• Dimensions: 0.45" x 0.4" x 0.3" (L x W x H)
• Indoor use; ambient temperature −4° to 122°F (−20° to 50°C)
• White finish on lead wire

Appropriate uses and restrictions

Use these connectors for solderless joins and power feeds in interior low‑voltage LED tape installations. They are designed specifically for 8 mm tape and should not be used with other tape widths.

• Common uses: cabinet lighting, cove lighting, returns, repairs, and other interior low‑voltage tape installations
• Fits 8 mm tape only — not compatible with wider or narrower tape
• Attached leads and extensions are not rated for in‑wall installation unless specified by the manufacturer

Warranty, safety notes, and installation guidance

The product includes a 5‑year limited warranty from the manufacturer. Installation must follow national and local electrical codes and the manufacturer's instructions; the manufacturer recommends installation by a qualified, licensed electrician.

• 5‑year limited warranty (see manufacturer for full terms)
• Install in accordance with national and local electrical codes
• Use only with Class 2 DC constant‑voltage LED drivers as specified
• Do not modify the product beyond instructions (may void warranty)
• Use copper wiring rated for at least 176°F (80°C); follow manufacturer guidance on in‑wall use

Before You Order

Confirm tape width (8 mm), system voltage, and quantity before ordering. Ensure planned wiring and driver meet the manufacturer's specifications.

• Verify your LED tape is 8 mm width — this connector is not compatible with other widths
• Confirm system voltage is 12–24VDC and account for amperage limits (5A @ 12V, 4A @ 24V)
• Use 16–20 AWG copper conductors rated for at least 176°F (80°C)
• Plan for installation by a qualified, licensed electrician and follow local codes

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Tape Light Terminal Block Connector, Screw Down, 8mm, Tape-To-Tape, White - Pack of 25 individually bagged, 25 Pack (DI-TB-CONN-TTT-25). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.