Diode LED OBD Flex Optics Mounting Channel Clips, 2-Pack (For use with OBD-MTCH-CL-39), 2 Pack (DI-OBD-MTCL-2)

Product Overview

The Diode LED DI-OBD-MTCL-2 is an aluminum LED channel component supplied as a 2-pack for mounting and protecting low-voltage LED tape runs. Its extruded aluminum body serves as a heat sink and a mounting profile for lenses, end caps, and clips in the same channel family.

Designed for cut-to-length installations, this channel is intended for under-cabinet, cove, shelf, display, and millwork lighting applications where a rigid mounting profile and thermal management are required. Confirm tape width and plan cuts to the fixed length before installation.

Key Features

• Aluminum extrusion body that helps draw heat away from LED tape
• Cut-to-length profile fits custom cabinet, display, and casework dimensions
• Pairs with matching Diode LED lenses, end caps, and mounting clips in the same series
• Supplied as a two-piece pack for larger or repeat installations

What this component does

The DI-OBD-MTCL-2 is an aluminum channel component that carries, protects, and helps cool low-voltage LED tape. The rigid extrusion provides a secure mounting surface and accepts compatible lenses, end caps, and clips from the same Diode LED OBD channel family.

• Aluminum body doubles as a heat sink to support output and color stability of LED tape
• Protects tape from mechanical damage and provides a finished profile for visible installations

Typical applications

Use this channel where a neat, durable extrusion is needed to mount LED tape in interior architectural details.

• Under-cabinet and above-cabinet accent lighting
• Cove, toe-kick, and perimeter lighting
• Shelf, display, and millwork edge lighting

Compatibility and fit

Confirm the LED tape width fits the channel opening and ensure any Diode LED lenses or end caps you plan to use are from the matching channel series. The channel is supplied as a 2-pack for repeat or multiple-location installs.

• Pairs with Diode LED OBD-series lenses, end caps, and mounting clips (use matching series parts)
• Verify tape width before ordering to ensure proper fit

Installation and planning notes

The extrusion is intended for cut-to-length installation. Plan cuts to the fixed length of each piece and prepare mounting surfaces accordingly. Use appropriate mounting clips and hardware from the same channel family for secure installation.

• Plan cuts and measure cabinet or millwork dimensions before mounting
• Confirm required accessories (lenses, end caps, mounting clips) are compatible with this channel series

Material and model details

This SKU is an aluminum channel component supplied as a two-piece pack. Use the model number when confirming compatibility or ordering replacements.

• Brand: Diode LED
• Model / SKU: DI-OBD-MTCL-2
• Material: Aluminum
• Finish: Aluminum

Before You Order

Confirm the model number and quantity required before ordering. Verify your LED tape width and the Diode LED channel-series accessories you plan to use are compatible with this extrusion.

• Measure tape width and mounting location; plan cuts to the fixed length of each extrusion piece
• Ensure any lenses, end caps, or mounting clips are from the matching Diode LED OBD channel series

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED OBD Flex Optics Mounting Channel Clips, 2-Pack (For use with OBD-MTCH-CL-39), 2 Pack (DI-OBD-MTCL-2). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.