Diode LED LINAIRE Flex, Side Bend, End Cap, Only (DI-LIN-SE-DEC)

Product Overview

The Diode LED DI-LIN-SE-DEC is an end-cap accessory for the LINAIRE Flex low-voltage LED tape platform, intended for interior linear lighting runs where a side-exit (side-bend) configuration is required.

It is supplied as the component only (end cap) and is designed for use with Diode LED LINAIRE Flex tape light assemblies. Requires a matching constant-voltage driver sized above the total run wattage.

Key Features

• Accessory for Diode LED LINAIRE Flex low-voltage tape light
• Side-bend/end-cap configuration for linear runs
• Intended for interior task, accent, and display lighting applications
• Requires a constant-voltage driver (driver not included)

What this part is

The DI-LIN-SE-DEC is a side-bend end-cap component for the Diode LED LINAIRE Flex low-voltage tape light system. It is supplied as the end-cap only and is intended to terminate or redirect a LINAIRE Flex tape installation where a side exit or side-bend configuration is required.

• Exact model/SKU: DI-LIN-SE-DEC
• Product type: LED Tape Light accessory (end cap / side bend)

Suitable applications

Use this end cap in interior linear lighting projects that use the LINAIRE Flex system. Typical applications for the LINAIRE Flex tape light platform include under-cabinet task lighting, cove and millwork accent lighting, and retail/display lighting.

• Interior task and accent lighting
• Under-cabinet, cove, shelf, and display installations

Compatibility and power requirements

This SKU is an accessory for Diode LED's low-voltage tape format and does not include power components. The LINAIRE Flex tape system requires a matching constant-voltage driver. Select a driver rated for constant-voltage output and sized above the total wattage of the installed tape run.

• Driver: constant-voltage type required (driver sold separately)
• Size the driver above the run wattage of the LED tape run

Ordering considerations

Confirm the LINAIRE Flex model and the quantity of end caps required for your layout before ordering. This listing is for the DI-LIN-SE-DEC end cap only; it does not include tape, channels, connectors, or drivers.

• Confirm the model number (DI-LIN-SE-DEC) and required quantity
• Verify compatibility with the specific Diode LED LINAIRE Flex tape used in your project

Before You Order

Confirm the model number and the quantity required for your installation. This SKU is an end-cap accessory for the Diode LED LINAIRE Flex system and does not include LED tape, driver, channels, or connectors.

• Verify you are specifying DI-LIN-SE-DEC for a side-bend/end-cap application
• Select a constant-voltage driver rated above the total wattage of your tape run
• If unsure about compatibility, confirm the exact LINAIRE Flex tape model before purchasing

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED LINAIRE Flex, Side Bend, End Cap, Only (DI-LIN-SE-DEC). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.