Diode LED Converging Systems ILC-200BW 2-channel (TW) DIMMING CONTROLLER - For use with E-NODE 4000 (DI-CS-ILC200BW)

Product Overview

The Diode LED DI-CS-ILC200BW is an aluminum LED channel component designed to house and finish low-voltage LED tape light. The aluminum extrusion also serves as a thermal path.

This cut-to-length aluminum channel pairs with matching Diode LED lenses, end caps, and mounting clips from the same channel series and is intended for cabinet, cove, and display lighting applications.

Key Features

• Aluminum extrusion that provides a finished housing for LED tape
• Cut-to-length profile for custom cabinet and casework dimensions
• Compatible with matching Diode LED lenses, end caps, and mounting clips in the same series
• Common uses include under-cabinet, cove, toe-kick, shelf, display, and perimeter lighting

What this component does

The DI-CS-ILC200BW is an aluminum extrusion intended to house low-voltage LED tape and provide a finished linear appearance. The aluminum body also functions as a thermal path for the installation.

• Provides a finished channel for surface- or recessed-style installations when used with appropriate lenses and mounting hardware
• Aluminum construction serves aesthetic and thermal-management roles

Recommended applications

Use this channel where linear LED tape requires a protected, finished housing in millwork or architectural lighting.

• Under-cabinet and above-cabinet accent lighting
• Cove lighting, toe-kick, and perimeter illumination
• Shelf, display, and millwork edge lighting

Materials and finish

The DI-CS-ILC200BW is made from aluminum and has an aluminum appearance finish.

• Material: Aluminum
• Finish: Aluminum

Compatibility and installation notes

Confirm LED tape width and accessory compatibility before installation. The channel is supplied as a cut-to-length extrusion and should be cut to the required fixed length prior to mounting.

• Pairs with matching Diode LED lenses, end caps, and mounting clips from the same channel series
• Confirm the LED tape width fits the channel opening
• Plan cuts to the fixed length before mounting

Before You Order

Confirm the model and that your LED tape width matches the channel opening before ordering.

• The extrusion is cut-to-length; plan and measure cuts before mounting
• Verify compatibility with Diode LED lenses, end caps, and mounting clips if those accessories are required

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Converging Systems ILC-200BW 2-channel (TW) DIMMING CONTROLLER - For use with E-NODE 4000 (DI-CS-ILC200BW). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.