Diode LED Channel Component, Lens, Black, 96 in, 10 Pack (DI-CPCHC-BL96-10)

Product Overview

Aluminum LED channel extrusion (96 in) in a black finish, intended to house low-voltage LED tape.

Supplied as a 10-piece pack. Designed to pair with Diode LED lenses, end caps, and mounting clips in the same channel series.

Key Features

• Aluminum body for extrusion rigidity and to serve as a mounting housing for LED tape
• Cut-to-length extrusion suitable for trimming to custom cabinet or casework dimensions
• Compatible with Diode LED lenses, end caps, and mounting clips from the same channel series
• Supplied in a 10-piece pack for larger or repeat installations

What this channel does

The Diode LED DI-CPCHC-BL96-10 is an aluminum extrusion intended to house low-voltage LED tape and provide a finished mounting surface.

• Encloses LED tape to provide a finished appearance
• Helps protect the tape from physical contact and dust

Typical applications

Common uses for channel extrusions of this type include architectural and millwork installations where a linear LED tape run is desired.

• Under-cabinet and above-cabinet lighting
• Cove, toe-kick, and perimeter lighting
• Shelf, display, and millwork edge lighting

Length and finish

Each extrusion measures 96 in in length and has a black finish. The extrusion is designed to be cut to length as needed for installation.

• Length: 96 in
• Finish: Black

Compatibility and pairing

The channel is intended to pair with Diode LED lenses, end caps, and mounting clips in the same channel series. Verify LED tape width against the channel opening before installation.

• Pairs with Diode LED lenses, end caps, and mounting clips in the same series
• Confirm tape width compatibility with the channel opening

Handling and support guidance

Plan for delivery and handling of 96 in extrusions and support the extrusion at its mounting clip points to maintain alignment.

• Account for 96 in length during delivery and handling
• Support the extrusion at mounting clip points to maintain a straight run

Before You Order

Verify tape width against the channel opening and confirm the model and quantity required.

• Confirm DI-CPCHC-BL96-10 is the correct channel and finish for your project
• Verify tape width compatibility with the channel opening

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Channel Component, Lens, Black, 96 in, 10 Pack (DI-CPCHC-BL96-10). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.