Diode LED VALENT Warm Dim LED Tape Light, 150lm, 3000K-1800K, 16.4 ft. Spool (DI-24V-VL1-WD3018-016)

Product Overview

The Diode LED DI-24V-VL1-WD3018-016 is a low-voltage VALENT warm-dim LED tape light supplied on a 16.4 ft spool. It delivers nominal output of 150 lumens, has a color range from 3000K down to 1800K when dimmed, and provides high color rendering with a CRI of 90+.

The tape draws 4.4 W per foot and requires a constant-voltage driver sized above the total wattage of the installed run.

Key Features

• Warm-dim color range: 3000K → 1800K
• High color rendering: 90+ CRI
• Nominal output: 150 lm
• Power draw: 4.4 W per foot
• Length: 16.4 ft spool (SKU DI-24V-VL1-WD3018-016)
• Low-voltage constant-voltage tape format for interior use

What this tape light does

This DI-24V-VL1-WD3018-016 tape is a low-voltage LED strip intended for interior task and accent lighting where high color fidelity and a warm-dim appearance are desired. It is specified with nominal output of 150 lm and a warm-dim behavior from 3000K down to 1800K as it dims.

• Low-voltage constant-voltage tape format
• Warm-dim characteristic for progressively warmer appearance as it dims
• Suited to interior task, accent, and display lighting

Recommended applications

The product's 90+ CRI makes it suitable for close-view and finish-critical installations. Typical uses called out include under-cabinet and shelf task lighting, cove and millwork accent lighting, and retail/display illumination where accurate color rendering is important.

• Under-cabinet and shelf task lighting
• Cove, trim, and millwork accent lighting
• Display and retail lighting where color rendering is important

Electrical and driver requirements

The tape draws 4.4 W per foot and is supplied as a 16.4 ft spool. It requires a constant-voltage driver; the driver should be sized larger than the total wattage of the installed run.

• Power draw: 4.4 W/ft — calculate total run wattage before selecting a driver
• Requires a constant-voltage driver
• Driver sizing: choose a driver with capacity above the calculated run wattage

Light quality and performance

The tape provides high color fidelity with CRI greater than 90 and a warm-dim range from 3000K to 1800K. The product listing specifies a nominal output of 150 lumens for the unit as provided.

• CRI: 90+ for accurate rendering of finishes and merchandise
• Color temperature: warm-dim from 3000K to 1800K
• Nominal lumen output: 150 lm

Length and format

This SKU is supplied as a single 16.4 ft spool of Diode LED VALENT warm-dim tape light in a low-voltage tape format intended for interior installations and integration into millwork, cabinets, or display fixtures.

• Spool length: 16.4 ft
• Format: low-voltage tape light for interior mounting

Before You Order

Verify the SKU and plan total run length so the required constant-voltage driver can be specified with capacity above the run wattage.

• Confirm DI-24V-VL1-WD3018-016 is the correct SKU
• Calculate total watts: 4.4 W × run length (ft)
• Specify a constant-voltage driver sized above the calculated run wattage

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED VALENT Warm Dim LED Tape Light, 150lm, 3000K-1800K, 16.4 ft. Spool (DI-24V-VL1-WD3018-016). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.