Diode LED BLAZE 300 Wet Location LED Tape Light, 24V, 5000K, 16.4 ft. Spool (DI-24V-BLBSC3-50-W016)

Product Overview

The Diode LED DI-24V-BLBSC3-50-W016 (BLAZE 300) is a 24 Volt LED tape light on a 16.4 ft spool that delivers 329 lumens per foot at 5000K with 90+ CRI. It is rated for indoor wet locations (IP65) and is dimmable.

Typical uses include under-cabinet, cove, millwork, and retail/display lighting. The tape has 2 in cut intervals, a 120° beam angle, and a maximum single run of 22 ft.

Key Features

• 329 lm/ft at 5000K with 90+ CRI
• 4.5 W per foot on a 24 Volt constant-voltage platform
• IP65 wet-location rating for indoor wet locations
• Cut points every 2 in for clean termination
• Maximum single run of 22 ft; dimmable
• 2835 Guang Mau LEDs with a 120° beam angle

What this tape light is for

The DI-24V-BLBSC3-50-W016 is for interior task, accent, and display lighting where bright, high-CRI illumination is needed. Common applications include under-cabinet and shelf task lighting, cove and millwork accent lighting, and retail or display illumination.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting

Electrical and driver requirements

This tape light operates on a 24 Volt constant-voltage platform and draws 4.5 watts per foot. Use a 24V constant-voltage driver sized above the total wattage of the run.

• Voltage: 24 Volt constant-voltage
• Power: 4.5 W/ft — size driver above the total run wattage
• Dimmable — requires a compatible 24V dimmable driver or dimming controller

Run length, cut points, and mounting considerations

Plan runs using the specified cut interval and maximum run length. The tape cuts every 2 inches for clean termination at cabinet lengths, and a single continuous run can extend up to 22 feet.

• Cut interval: 2 in
• Maximum single run: 22 ft
• Mounting: designed for low-voltage tape-format installation in indoor/wet-location environments

Light output and color quality

This model delivers 329 lumens per foot at a 5000K color temperature with a 90+ CRI, giving bright, cool-white light and accurate rendering of finishes and merchandise. The LEDs are 2835 Guang Mau chips with a 120° beam angle suitable for linear task and accent illumination.

• Lumen output: 329 lm/ft
• Color temperature: 5000K
• CRI: 90+
• LED type: 2835 Guang Mau Chip
• Beam angle: 120°

Certifications and environmental rating

The tape light is UL Listed to standard 2108 and is rated IP65 for indoor wet-location use.

• Certification: UL Listed 2108
• Location rating: Indoor / Wet Location / IP65

Before You Order

Verify the SKU and calculate driver capacity based on total run wattage before ordering.

• Confirm DI-24V-BLBSC3-50-W016 is the required SKU
• Calculate total wattage (4.5 W/ft × run length) and choose a 24V constant-voltage driver sized above that wattage

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 300 Wet Location LED Tape Light, 24V, 5000K, 16.4 ft. Spool (DI-24V-BLBSC3-50-W016). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.