Diode LED BLAZE 200 Wet Location LED Tape Light, 24V, 5000K, 100 ft. Spool (DI-24V-BLBSC2-50-W100)

Product Overview

The Diode LED BLAZE 200 DI-24V-BLBSC2-50-W100 is a 24V LED tape light supplied on a 100 ft. spool. It produces 224 lumens per foot at 5000K with a CRI of 90+.

This tape light is dimmable and rated for indoor and wet-location use. Its cut interval is 2 inches, and the maximum single run is 40 feet.

Key Features

• 24V tape light with 5000K color temperature and 90+ CRI
• Light output of 224 lm/ft; power draw of 2.93 W/ft
• 2-inch cut interval and maximum single run of 40 ft
• Dimmable; indoor and wet-location rating
• 100 ft. spool

Where to Use the BLAZE 200 Tape Light

The Diode LED BLAZE 200 is suited to under-cabinet and shelf task lighting, cove and millwork accents, and display or retail lighting.

5000K Light Output and Color Rendering

This tape light produces 224 lumens per foot at a 5000K color temperature. Its CRI of 90+ supports accurate rendering of finishes and merchandise under close light.

Plan the 24V Run and Driver

The tape operates on a 24V constant-voltage platform and draws 2.93 watts per foot. Use a 24V constant-voltage driver sized above the run wattage.

The tape can be cut at 2-inch intervals. A single run is limited to 40 feet; the 100 ft. spool length does not indicate that the full spool can be used as one run.

Dimming and Location Rating

The DI-24V-BLBSC2-50-W100 is dimmable and rated for indoor and wet-location use. It is UL Listed 2108.

Before You Order

Plan a 24V constant-voltage driver sized above the run wattage.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 200 Wet Location LED Tape Light, 24V, 5000K, 100 ft. Spool (DI-24V-BLBSC2-50-W100). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.