Diode LED Channel Component Single End Cap Pair 45° Premium Diffusion

Product Overview

45° corner-profile end-cap pair for Diode LED 45° channel runs, supplied as the set of four 45° shapes (open right, closed right, open left, closed left).

Offered in three finish SKUs—Aluminum, Black, or White—which identify the color of the end-cap components.

Key Features

• Includes four 45° end-cap shapes: 1 open right, 1 closed right, 1 open left, 1 closed left to finish 45° channel terminations.
• Premium Diffusion lens elements are specified for use with the matching channel series to reduce visible LED dotting when assembled with the channel and lens.
• Finish options: Aluminum, Black, White (finish determined by selected SKU).

What this end-cap pair does

These components provide finished single-end terminations for a Diode LED 45° channel run. When used with the matching premium diffusion lens and channel extrusion, they complete the visible ends of a 45° corner channel.

• Supplied shapes: 1 open right, 1 closed right, 1 open left, 1 closed left (45° profile).
• Sold as end-cap pairs; they do not include the channel extrusion, mounting clips, or LED tape.

Compatibility and fit

These end caps are designed for the matching Diode LED 45° channel family and its lens system. Confirm the specific channel profile and lens series when ordering.

• Verify LED tape width fits the channel opening before installation.
• Plan cuts to the fixed channel length; end caps finish the cut ends.

Finishes and SKUs

Choose the SKU that corresponds to the desired finish. Each variant represents the same end-cap set in a different finish.

• DI-CPEC-45PD-1 — Aluminum finish
• DI-CPEC-45PDB-1 — Black finish
• DI-CPEC-45PDW-1 — White finish

Typical applications

These end caps are intended for decorative and functional LED tape lighting installations that use a 45° channel profile.

• Under-cabinet and above-cabinet accent lighting
• Cove, toe-kick, and perimeter lighting
• Shelf, display, and millwork edge lighting
• Corner and inside-angle linear runs

Before You Order

Confirm the channel profile and lens series you are using, and verify the LED tape width fits the channel opening.

• Select the SKU that matches the finish you need.
• These SKUs are end-cap sets only; ensure you have the matching channel extrusion, lens, and mounting clips.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED Channel Component Single End Cap Pair 45° Premium Diffusion. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.