Diode LED BLAZE X 300 LED Tape Light 24V 16 4 ft Spool

Product Overview

The Diode LED DI-24V-BLX3-24-016 (BLAZE X 300) is a 24VDC LED tape light supplied on a 16.4 ft spool for interior task, accent, and display lighting.

This high-CRI tape delivers 322 lumens per foot at 95+ CRI while drawing 4.3 W/ft; it has 2 in cut intervals and supports single runs up to 40 ft.

Key Features

• 322 lm/ft luminous output with 95+ CRI
• 24VDC constant-voltage platform; 4.3 W per foot power draw
• Cut points every 2 in for clean terminations
• Supports single runs up to 40 ft
• 120° beam angle; UL Listed to UL 2108; indoor/damp location rated
• Dimmable (requires a compatible 24V dimming driver)

What this tape light is for

The DI-24V-BLX3-24-016 is intended for interior task, accent, and display lighting where high color fidelity and compact linear illumination are needed.

Typical applications include under-cabinet and shelf task lighting, cove and millwork accent lighting, and retail/display illumination in indoor or damp-location settings.

• Under-cabinet task lighting and merchandise/display illumination
• Cove and millwork accent lighting
• Indoor and damp-location interior linear lighting (not rated for continuous wet outdoor exposure)

Light output and color quality

This SKU delivers 322 lumens per foot and maintains a CRI of 95+ for accurate color rendering under close viewing conditions.

The tape uses Epistar 2835 LEDs and has a 120° beam angle for broad, even illumination along runs.

• Luminous output: 322 lm/ft
• Color rendering: 95+ CRI
• Beam angle: 120°
• Available color temperatures in this family: 2400K, 2700K, 3000K, 3500K, 4200K, 5000K, 6300K (the DI-24V-BLX3-24-016 is the 2400K option)

Voltage, wattage and driver requirements

The tape operates on a 24VDC constant-voltage system and draws 4.3 W per foot; select a 24V driver with rated output greater than the total run wattage.

Dimming is supported but requires a compatible 24V dimming driver or controller; confirm compatibility with your dimmer type.

• Voltage: 24VDC
• Power draw: 4.3 W/ft
• Dimmable: Yes (use a compatible 24V dimming driver)
• Driver selection: size driver above calculated run wattage

Cut points, spool length and run limits

Cut intervals are 2 inches to allow custom lengths for cabinetry and millwork. The tape is supplied on a 16.4 ft spool.

Single continuous runs are supported up to 40 ft; plan terminations and feed points to remain within that limit.

• Cut interval: every 2 in
• Spool length: 16.4 ft
• Maximum single run: 40 ft

Safety, location and certification

The product is UL Listed to Standard 2108 and is rated for indoor and damp-location installations. It is not listed for continuous wet outdoor exposure.

Follow applicable electrical codes and use appropriately rated drivers, connectors, and accessories for installation.

• UL Listing: UL 2108
• Location rating: Indoor / Damp Location

Before You Order

Confirm the model number, color temperature, and quantity before ordering.

• Calculate total run length and multiply by 4.3 W/ft to size a 24VDC constant-voltage driver (select a driver rated above the total wattage).
• Verify whether a dimming driver or controller is required for your control system.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE X 300 LED Tape Light 24V 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.