Diode LED BLAZE X 300 LED Tape Light 12V 100 ft Spool

Product Overview

Diode LED DI-12V-BLX3-24-100 is a 12VDC low-voltage LED tape light on a 100 ft spool, specified at 318 lm/ft with a 95+ CRI and a color temperature of 2400K.

Suitable for interior task, accent, and display lighting, this tape uses Epistar 2835 LEDs, has 1" cut intervals and a maximum single continuous run of 20 ft on a constant-voltage feed.

Key Features

• 2400K color temperature with 95+ CRI for accurate color rendering
• 318 lumens per foot at 4.3 W/ft
• Cuttable every 1" to fit cabinets and millwork
• Maximum single continuous run: 20 ft on a 12VDC constant-voltage system
• Beam angle: 120°; LED type: Epistar 2835
• Location rating: Indoor / Damp

Intended uses

The DI-12V-BLX3-24-100 is intended for interior linear lighting where high color fidelity and low-voltage distribution are desired. Typical uses include under-cabinet task lighting, cove and millwork accent illumination, and retail or display lighting in dry or damp indoor locations.

• Common applications: under-cabinet, cove, shelf/display, millwork accent
• Rated for indoor and damp locations; not rated for continuous outdoor or submerged use

Light output and color quality

This 2400K SKU is specified at 318 lumens per foot with a CRI of 95+, providing high color fidelity for finishes and merchandise under close inspection.

• Color temperature: 2400K
• Lumen output: 318 lm/ft
• Color rendering: 95+ CRI
• Beam angle: 120°

Voltage, wattage and run length

The spool is designed for a 12VDC constant-voltage system and draws 4.3 W/ft. The manufacturer specifies a maximum single continuous run of 20 ft; plan driver capacity and distribution accordingly.

• Voltage: 12VDC constant-voltage
• Power draw: 4.3 W/ft
• Max single run: 20 ft
• Size drivers above the total wattage of the intended run

Cutting, mounting and dimming considerations

The tape has 1-inch cut intervals for precise termination. It uses surface-mount 2835 LED packages. The product is dimmable when used with compatible 12V dimmable drivers or controllers—verify compatibility with your selected dimmer or controller.

• Cut interval: every 1 in
• LED package: Epistar 2835
• Dimmable: Yes, with compatible 12V dimmable driver or controller
• Mounting: standard low-voltage tape mounting methods; verify mounting channel or adhesive suitability for your project

Before You Order

This page describes the 2400K SKU DI-12V-BLX3-24-100. Plan driver capacity using the total run wattage and follow the 20 ft maximum single-run recommendation.

• Verify you have a 12VDC constant-voltage driver sized above the total wattage of your run
• For runs longer than 20 ft, plan additional feeds or power injection according to installer practice
• Confirm the indoor/damp rating matches your installation environment

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE X 300 LED Tape Light 12V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.