Diode LED BLAZE X 200 LED Tape Light 12V 16 4 ft Spool

Product Overview

The Diode LED DI-12V-BLX2-24-016 (BLAZE X) is a 12VDC LED tape light supplied on a 16.4 ft spool that delivers 225 lm/ft at 2400K with 95+ CRI for accurate color rendering in task and display lighting.

The tape draws 3.1 W/ft, is dimmable, has 1 in cut intervals, and supports single runs up to 22 ft. It is rated for indoor/damp locations and is UL listed to the listed standard.

Key Features

• 95+ CRI for high color fidelity
• 225 lumens per foot at 3.1 W/ft
• 1 in cut intervals for custom lengths
• 12VDC constant-voltage operation and dimmable
• Indoor / Damp Location rated and UL listed

Intended uses

This SKU is suitable for interior task and accent lighting where high color fidelity and compact linear illumination are needed. Typical uses include under-cabinet and shelf task lighting, cove and millwork accent runs, and retail or display lighting in indoor or damp locations.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Retail and display lighting
• Interior/damp-location linear lighting

Light output and color characteristics

The DI-12V-BLX2-24-016 delivers 225 lumens per foot at 2400K and maintains a CRI of 95+ for faithful color rendering. The tape's specified beam angle is 120°, suitable for broad, even illumination.

• Lumen output: 225 lm/ft
• Color temperature (this SKU): 2400K
• Color rendering index: 95+
• Beam angle: 120°

Voltage, wattage and driver requirements

The tape operates on a 12VDC constant-voltage system and consumes 3.1 W per foot. Use a 12VDC constant-voltage driver sized above the total run wattage. Verify dimming compatibility with the chosen driver or controller.

• Operating voltage: 12VDC constant-voltage
• Power consumption: 3.1 W/ft
• Dimming: Yes (requires compatible 12VDC dimming driver or controller)

Cut intervals, run length and mounting

The tape includes cut points every 1 inch for clean termination at required lengths. A single continuous run is specified up to 22 ft; plan runs and power feeds to address voltage drop and total system wattage. Use appropriate channels or mounting hardware as needed for installation (not included).

• Cut interval: every 1 in
• Maximum single run: 22 ft
• Mounting: use appropriate channel or mounting hardware as required

Certifications and warranty

The product is listed as UL Listed to the noted standard and is rated for indoor/damp locations. A 12-year warranty is indicated in the product description.

• Certification: UL Listed (UL 2108)
• Location rating: Indoor / Damp Location
• Warranty: 12 Year (manufacturer-stated)

Before You Order

Verify the SKU and color temperature before ordering. This page describes the DI-12V-BLX2-24-016 SKU (2400K); other color temperature variants exist within the same product family.

• Requires a 12VDC constant-voltage driver sized above the total run wattage.
• Plan runs to respect the 22 ft maximum single run and account for voltage drop.
• For dimming, choose a driver or controller compatible with 12VDC LED tape dimming.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE X 200 LED Tape Light 12V 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.