Diode LED BLAZE 300 Wet Location Strip Light 24V 100 ft Spool

Product Overview

The Diode LED DI-24V-BLBSC3-27-W100 (BLAZE 300) is a 24 Volt LED tape light supplied on a 100 ft spool for interior wet-location-rated accent and task lighting.

This 2700K SKU delivers 331 lm/ft at 4.5 W/ft with 90+ CRI, is IP65 rated, cuttable at 2 in intervals, and intended for use with 24V constant-voltage drivers.

Key Features

• 331 lm/ft at 2700K with 90+ CRI
• 4.5 W per foot on a 24 V constant-voltage platform
• IP65 wet-location rating
• Cut points every 2 in; maximum single run 22 ft
• 120° beam angle; 2835 Guang Mau LED chips
• Dimmable with compatible 24V dimmable drivers/controls

What this product is for

The DI-24V-BLBSC3-27-W100 is a low-voltage LED tape intended for interior task, accent, and display lighting where high color fidelity and an IP65 wet-location rating are desired.

• Common applications: under-cabinet task lighting, cove and millwork accent lighting, retail display illumination
• Supplied on a 100 ft spool for long continuous runs or multiple shorter runs

Light output and performance

This 2700K SKU produces 331 lumens per foot while drawing 4.5 W per foot, offering warm white illumination with 90+ CRI.

• Color temperature: 2700K
• Color rendering: 90+ CRI
• Beam angle: 120°
• LED type: 2835 Guang Mau Chip

Electrical and driver requirements

The tape operates on a 24 Volt constant-voltage system. Select a driver with continuous output rated above the total wattage of your assembled runs. Use compatible dimmable 24V drivers and controls if dimming is required.

• Voltage: 24 V constant-voltage
• Power draw: 4.5 W/ft
• Maximum recommended single run: 22 ft

Cutting, mounting, and location rating

The tape is cuttable at 2 in intervals to fit cabinetry and millwork. It is rated IP65 for wet locations; ensure appropriate sealing of end terminations and mounting for wet-location installations.

• Cut interval: every 2 in
• Location rating: Indoor / Wet Location (IP65)
• Dimmable: Yes (requires compatible 24V dimmable driver)

Technical certifications and compliance

This SKU is UL Listed to standard 2108 for low-voltage lighting.

• Certification: UL Listed 2108

Before You Order

Confirm you are ordering the 2700K SKU (DI-24V-BLBSC3-27-W100). Choose a 24V constant-voltage driver rated above the total wattage of your run and plan feeds for runs longer than the 22 ft maximum single-run recommendation.

• Confirm SKU: DI-24V-BLBSC3-27-W100 (2700K)
• Driver: 24V constant-voltage, sized above total wattage
• Maximum single run: 22 ft

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 300 Wet Location Strip Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.