Diode LED BLAZE 300 LED Tape Light 24V 400 ft Spool

Product Overview

The Diode LED BLAZE 300 (DI-24V-BLBSC3) is a 24VDC LED tape light supplied on a 400 ft spool for interior linear lighting. It is rated at 4.5 watts per foot and has cut points every 2 inches.

Available in three color temperatures: 2700K, 3000K, and 3500K; offered as SKUs DI-24V-BLBSC3-27-400, DI-24V-BLBSC3-30-400, and DI-24V-BLBSC3-35-400.

Key Features

• 24VDC constant-voltage tape light on a 400 ft spool
• Rated power: 4.5 W per foot
• Cut intervals every 2 inches
• Available color temperatures: 2700K, 3000K, 3500K
• Intended for interior linear lighting applications

What this tape light is for

This 24V LED tape light is supplied for interior linear lighting applications. Typical uses noted for this product include under-cabinet and shelf task lighting, cove and millwork accent lighting, and display and retail lighting.

• Under-cabinet and shelf task lighting
• Cove and millwork accent lighting
• Display and retail lighting

Electrical requirements and sizing

The product is a 24VDC constant-voltage tape light rated at 4.5 W per foot. Select a 24V constant-voltage driver with an output rating greater than the total wattage of all connected runs.

• Power draw: 4.5 W per foot — multiply by total feet to determine run wattage
• Use a 24VDC constant-voltage driver sized above the total run wattage

Cut intervals and planning run lengths

The tape has marked cut points every 2 inches to allow termination and sizing to cabinet or display lengths. Plan feed and termination locations so they align with the 2-inch cut intervals.

• Cut interval: 2 in — cut only at marked points
• Supplied on a 400 ft spool for long continuous runs or multiple shorter runs

Available SKUs and color temperatures

Choose the SKU that matches the desired color temperature. All listed SKUs share the same voltage, wattage, cut interval, and spool length.

• DI-24V-BLBSC3-27-400 — 2700K
• DI-24V-BLBSC3-30-400 — 3000K
• DI-24V-BLBSC3-35-400 — 3500K

Before You Order

Confirm the correct SKU for the desired color temperature and calculate total run wattage to choose a suitably sized 24VDC constant-voltage driver.

• Verify color temperature SKU (2700K, 3000K, or 3500K).
• Calculate total watts = 4.5 W × total feet of tape to size the 24V driver.
• Plan feed and termination locations to align with 2 in cut intervals.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 300 LED Tape Light 24V 400 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.