Diode LED BLAZE 300 LED Tape Light 24V 100 ft Spool

Product Overview

100 ft spool of Diode LED DI-24V-BLBSC3-27-100 24 Volt LED tape light in 2700K with 90+ CRI.

Produces 338 lumens per foot at 4.5 W/ft, with 2-inch cut intervals and a specified maximum single continuous run of 22 ft. Rated IP65 for indoor/wet-location use and UL Listed to 2108.

Key Features

• 338 lm/ft output at 2700K with 90+ CRI
• 4.5 W per foot on a 24V constant-voltage platform
• Cut points every 2 in
• Specified single continuous run up to 22 ft
• Indoor / wet-location rated (IP65) and UL Listed 2108
• Dimmable

What this tape light is for

The DI-24V-BLBSC3-27-100 is intended for interior task and accent lighting where warm color temperature and higher CRI are desired. Common uses include under-cabinet, cove, millwork, and retail/display lighting.

• 2700K warm color temperature
• 90+ CRI for accurate color rendering

Output and electrical requirements

This 24 Volt tape delivers 338 lumens per foot while drawing 4.5 watts per foot. It requires a 24V constant-voltage driver sized above the total wattage of the assembled runs.

• Luminous output: 338 lm/ft
• Power draw: 4.5 W/ft
• Voltage: 24 V constant-voltage (requires compatible 24V driver)
• Dimmable when used with compatible 24V dimming drivers and controls

Cutting, run length, and mounting basics

The tape has 2-inch cut intervals for terminating to shorter lengths. The product lists a maximum single continuous run of 22 ft; plan feed points or additional runs as needed for longer installations.

• Cut interval: 2 in
• Maximum single run: 22 ft
• Mounting: use appropriate channels, clips, or clean surfaces and compatible accessories

Location rating and certifications

This SKU is specified as IP65 and is UL Listed to the 2108 standard.

• Location rating: Indoor / Wet Location / IP65
• Certification: UL Listed 2108

Technical specifications at a glance

Quick reference for designers and specifiers.

• Model / SKU: DI-24V-BLBSC3-27-100
• Color temperature: 2700K
• CRI: 90+
• LED type: 2835 Guang Mau Chip
• Beam angle: 120°
• Spool length: 100 ft
• Dimmable: Yes

Before You Order

Confirm the SKU and color temperature and verify total run wattage before selecting a 24V constant-voltage driver.

• This SKU is DI-24V-BLBSC3-27-100 (2700K). A 5000K variant is available under a different SKU.
• Size the 24V driver above the combined wattage of all runs (4.5 W/ft × total feet).

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 300 LED Tape Light 24V 100 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.