Diode LED BLAZE 200 Wet Location Strip Light 24V 16 4 ft Spool

Product Overview

The Diode LED DI-24V-BLBSC2-27-W016 is a 24 Volt tape light delivering 209 lumens per foot at 2700K with a CRI of 90+ for high-quality interior task, accent, and display lighting.

It operates at 2.93 W/ft, has 2-inch cut intervals, and supports single runs up to 40 feet. It is UL Listed to 2108 and rated for indoor wet locations. Use with a 24V constant-voltage driver sized above the run wattage.

Key Features

• 209 lm/ft at 2700K
• 2.93 W/ft on 24V constant-voltage
• 90+ CRI
• 2-inch cut intervals
• Maximum single run: up to 40 ft
• Indoor / Wet Location rated
• UL Listed 2108
• Dimmable with compatible 24V dimming drivers

Intended uses

This Diode LED BLAZE 200 tape light is intended for interior task, accent, and display lighting where high color fidelity is desired.

• Common installations: under-cabinet, cove, millwork, and display/retail lighting

Light output and color

The DI-24V-BLBSC2-27-W016 produces 209 lumens per foot at 2700K and has a CRI above 90, providing warm light with strong color rendering.

• Lumens: 209 lm/ft
• Color temperature: 2700K
• CRI: 90+

Electrical and dimming

The strip operates on a 24V constant-voltage platform and draws 2.93 W/ft. It is dimmable when used with compatible 24V dimming drivers or controls.

• Voltage: 24V constant-voltage
• Power consumption: 2.93 W/ft
• Dimmable: yes with compatible 24V dimmers/drivers

Installation details

The tape light has 2-inch cut intervals for making precise terminations. A single continuous run may extend up to 40 feet.

• Cut interval: every 2 in
• Maximum single run: up to 40 ft
• Size the driver above the run's total wattage (run watts = 2.93 W/ft × run length)

Certifications and location rating

This model is UL Listed to standard 2108 and is rated for indoor wet locations.

• Certification: UL Listed 2108
• Location rating: Indoor / Wet Location

Before You Order

This listing is for the 2700K variant (DI-24V-BLBSC2-27-W016).

• Requires a 24V constant-voltage driver sized above the total run wattage (run watts = 2.93 W/ft × run length).
• Verify the product's wet-location rating is appropriate for your specific installation and follow local electrical codes.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Diode LED BLAZE 200 Wet Location Strip Light 24V 16 4 ft Spool. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.